TS-7250-V3 MikroBus Header: Difference between revisions

From embeddedTS Manuals
(Created page with "The Mikrobus header is a 0.1" pitch 2x8 header which supports [https://www.mikroe.com/click the Mikroe Click board ecosystem]. This header features 3.3V, 5V, SPI, GPIO, ADC,...")
 
No edit summary
Line 12: Line 12:
|-
|-
| 1
| 1
| [[#Silabs ADC]]
| ADC Not yet implemented
|-
|-
| 2
| 2
Line 18: Line 18:
|-
|-
| 3
| 3
| [[#FPGA_SPI|spidev 0.1 CS#]]
| [[#FPGA_SPI|spidev 5.0 CS#]]
|-
|-
| 4
| 4
| [[#FPGA_SPI|spidev 0.1 CLK]]
| [[#FPGA_SPI|spidev 5.0 CLK]]
|-
|-
| 5
| 5
| [[#FPGA_SPI|spidev 0.1 MISO]]
| [[#FPGA_SPI|spidev 5.0 MISO]]
|-
|-
| 6
| 6
| [[#FPGA_SPI|spidev 0.1 MOSI]]
| [[#FPGA_SPI|spidev 5.0 MOSI]]
|-
|-
| 7
| 7

Revision as of 15:07, 26 April 2021

The Mikrobus header is a 0.1" pitch 2x8 header which supports the Mikroe Click board ecosystem. This header features 3.3V, 5V, SPI, GPIO, ADC, PWM, a UART, and PWM. All IO are 3.3V tolerant.

Signals Pin Layout
Pin Signal
1 ADC Not yet implemented
2 MIKRO_RESET# GPIO Bank 7 IO 0
3 spidev 5.0 CS#
4 spidev 5.0 CLK
5 spidev 5.0 MISO
6 spidev 5.0 MOSI
7 3.3V
8 GND
9 GND
10 5V
11 /dev/i2c-2 DAT
12 /dev/i2c-2 CLK
13 ttymxc6 TXD
14 ttymxc6 RXD
15 MIKRO_INT
16 MIKRO_PWM

TS-7250-V3-Mikrobus Header.svg


Retrieved from "http://docs.embeddedTS.com/index.php?title=TS-7250-V3_MikroBus_Header&oldid=13783"