TS-7250-V3 MikroBus Header

From embeddedTS Manuals
Revision as of 17:18, 27 February 2020 by Mark (talk | contribs) (Created page with "The Mikrobus header is a 0.1" pitch 2x8 header which supports [https://www.mikroe.com/click the Mikroe Click board ecosystem]. This header features 3.3V, 5V, SPI, GPIO, ADC,...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Mikrobus header is a 0.1" pitch 2x8 header which supports the Mikroe Click board ecosystem. This header features 3.3V, 5V, SPI, GPIO, ADC, PWM, a UART, and PWM. All IO are 3.3V tolerant.

Signals Pin Layout
Pin Signal
1 #Silabs ADC
2 MIKRO_RESET# GPIO Bank 7 IO 0
3 spidev 0.1 CS#
4 spidev 0.1 CLK
5 spidev 0.1 MISO
6 spidev 0.1 MOSI
7 3.3V
8 GND
9 GND
10 5V
11 /dev/i2c-2 DAT
12 /dev/i2c-2 CLK
13 ttymxc6 TXD
14 ttymxc6 RXD
15 MIKRO_INT
16 MIKRO_PWM

TS-7250-V3-Mikrobus Header.svg


Retrieved from "http://docs.embeddedTS.com/index.php?title=TS-7250-V3_MikroBus_Header&oldid=11453"