TS-7250-V3 MikroBus Header

The Mikrobus header is a 0.1" pitch 2x8 header which supports the Mikroe Click board ecosystem. This header features 3.3V, 5V, SPI, GPIO, ADC, PWM, a UART, and PWM. All IO are 3.3V tolerant.

Signals	Pin Layout
Pin Signal 1 ADC Not yet implemented 2 MIKRO_RESET# GPIO Bank 7 IO 0 3 spidev 5.0 CS# 4 spidev 5.0 CLK 5 spidev 5.0 MISO 6 spidev 5.0 MOSI 7 3.3V 8 GND 9 GND 10 5V 11 /dev/i2c-2 DAT 12 /dev/i2c-2 CLK 13 ttymxc6 TXD 14 ttymxc6 RXD 15 MIKRO_INT 16 MIKRO_PWM