TS-7250-V3 Power Connectors: Difference between revisions
From embeddedTS Manuals
No edit summary |
(Fix power input range) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
The TS-7250-V3 provides two power inputs on 2 pin removable terminal blocks. | {{Note|While the photos below, and shipped PCBs, may show a silkscreen of "8-28V" on the high-voltage input block, all PCB revisions from Rev. A forward support 8-48 VDC input as noted below.}} | ||
The TS-7250-V3 provides two power inputs on 2 pin removable terminal blocks. One terminal block supports 5 VDC, and one supports 8-48 VDC. Only one power input may be connected at a time. A typical power supply for this platform should provide 10 W. Refer to the [[#Power Input Specifications|specifications]] section for more information on power requirements. | |||
Under the removable terminal block the PCB is labelled with the power supply polarity. | Under the removable terminal block the PCB is labelled with the power supply polarity. | ||
[[File:TS-7250-V3 removable power connector. | [[File:TS-7250-V3 removable power connector.jpg|500px]] | ||
Latest revision as of 13:46, 9 June 2023
| Note: | While the photos below, and shipped PCBs, may show a silkscreen of "8-28V" on the high-voltage input block, all PCB revisions from Rev. A forward support 8-48 VDC input as noted below. |
The TS-7250-V3 provides two power inputs on 2 pin removable terminal blocks. One terminal block supports 5 VDC, and one supports 8-48 VDC. Only one power input may be connected at a time. A typical power supply for this platform should provide 10 W. Refer to the specifications section for more information on power requirements.
Under the removable terminal block the PCB is labelled with the power supply polarity.
