TS-7250-V3 TS-SER4: Difference between revisions
From embeddedTS Manuals
No edit summary |
No edit summary |
||
Line 19: | Line 19: | ||
Open the device tree at arch/arm/boot/dts/imx6ul-ts7250v3.dts: | Open the device tree at arch/arm/boot/dts/imx6ul-ts7250v3.dts: | ||
<source lang=json line> | <source lang=json line highlight="12-20"> | ||
pc104bus: fpgaisa@50 { | pc104bus: fpgaisa@50 { | ||
compatible = "technologic,pc104-bus"; | compatible = "technologic,pc104-bus"; |
Revision as of 17:09, 4 March 2020
File:TS-SER4jpg | |
Product Page | |
8-bit IO |
---|
The TS-SER4 supports 4 UARTs as RS-232, RS-485, or RS-422.
Refer to the TS-SER4 manual for hardware documentation.
The TS-SER4 implements 16550A based UARTs which require a kernel driver.
Under Linux this requires a device tree change. See the Kernel compile section for more details about getting set up the compile the kernel.
Open the device tree at arch/arm/boot/dts/imx6ul-ts7250v3.dts:
pc104bus: fpgaisa@50 {
compatible = "technologic,pc104-bus";
reg = <0x50 0x4>;
ranges = <0 0 0x1000>;
reset-gpio = <&gpio3 7 0>;
#address-cells = <0x1>;
#size-cells = <0x1>;
status = "okay";
/* For TS-SER1 set IRQ6+COM3 jumpers on: */
ts16550@3e8 {
compatible = "technologic,ts16550";
reg = <0x3e8 8>;
interrupt-parent = <&fpga_intc>;
interrupts = <15>;
status = "okay";
};
};