TS-72XX 2.4 Kernel Compile Guide: Difference between revisions
From embeddedTS Manuals
(Created page with "{{Warning|BACKUP YOUR DATA FIRST}} ''' Prerequisites ''' RHEL/Fedora/CentOS: <source lang=bash> yum install ncurses-devel ncurses yum groupinstall "Development Tools" "Developm...") |
No edit summary |
||
Line 34: | Line 34: | ||
CROSS_COMPILE = insert/your/directory/structure/here/crosstool/arm-linux/gcc-3.3.4-glibc-2.3.2/bin/arm-linux- | CROSS_COMPILE = insert/your/directory/structure/here/crosstool/arm-linux/gcc-3.3.4-glibc-2.3.2/bin/arm-linux- | ||
Next the config file needs to be set up. Run "make menuconfig" | |||
*Load the TS-7260 config file by typing "L" three times, "ENTER", and specify "arch/arm/def-configs/ts7200". When finished, save and exit back to the menuconfig | |||
*Exit menuconfig and be sure to say "Yes" to save your changes | |||
{{Note|Large kernels may not fit on the kernel partition of the SD card. Check the size of the newly created kernel.}} | |||
<source lang=bash> | <source lang=bash> | ||
make | make dep | ||
make | make Image | ||
</source> | </source> | ||
Optionally you can compile and archive the modules to extract on the flash later: | |||
<source lang=bash> | <source lang=bash> | ||
mkdir newmodules | mkdir newmodules | ||
INSTALL_MOD_PATH=./newmodules make modules_install | INSTALL_MOD_PATH=./newmodules make modules_install | ||
tar czvf modules_2.4.26-ts11.tar.gz -C newmodules/ | |||
</source> | </source> | ||
Copy the newmodules directory to a thumb drive or other accessible media (ftp or NFS will work also), then copy newmodules/lib/modules/2.4.26-ts11/* to your board. See the redboot instructions for loading a kernel permanently | {{Note|If you receive the error "Kernel version 2.4.26-ts11 requires old depmod" the modules can still be installed to the board, but "depmod" should be invoked manually after the modules are installed.}} | ||
Copy the newmodules directory to a thumb drive or other accessible media (ftp or NFS will work also), then copy newmodules/lib/modules/2.4.26-ts11/* to your board. See the [[Linux for ARM on TS-72XX User's Guide#eCos.2FRedBoot redboot instructions]] for loading a kernel permanently. |
Revision as of 10:02, 3 October 2013
WARNING: | BACKUP YOUR DATA FIRST |
Prerequisites
RHEL/Fedora/CentOS:
yum install ncurses-devel ncurses
yum groupinstall "Development Tools" "Development Libraries"
Ubuntu/Debian:
apt-get install build-essential libncurses5-dev libncursesw5-dev
For other distributions, please refer to their documentation to find equivalent tools.
Set up the Sources and Toolchain
wget ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/cross-toolchains/crosstool-linux-gcc-3.3.4-glibc-2.3.2-0.28rc39.tar.bz2
bunzip2 crosstool-linux-gcc-3.3.4-glibc-2.3.2-0.28rc39.tar.bz2
tar -xvf crosstool-linux-gcc-3.3.4-glibc-2.3.2-0.28rc39.tar
wget ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/sources/tskernel-2.4.26-ts11-feb232011.tar.gz
tar -xvzf tskernel-2.4.26-ts11-feb232011.tar.gz
cd linux24
Open the Makefile and edit CROSS_COMPILE to say:
CROSS_COMPILE = insert/your/directory/structure/here/crosstool/arm-linux/gcc-3.3.4-glibc-2.3.2/bin/arm-linux-
Next the config file needs to be set up. Run "make menuconfig"
- Load the TS-7260 config file by typing "L" three times, "ENTER", and specify "arch/arm/def-configs/ts7200". When finished, save and exit back to the menuconfig
- Exit menuconfig and be sure to say "Yes" to save your changes
Note: | Large kernels may not fit on the kernel partition of the SD card. Check the size of the newly created kernel. |
make dep
make Image
Optionally you can compile and archive the modules to extract on the flash later:
mkdir newmodules
INSTALL_MOD_PATH=./newmodules make modules_install
tar czvf modules_2.4.26-ts11.tar.gz -C newmodules/
Note: | If you receive the error "Kernel version 2.4.26-ts11 requires old depmod" the modules can still be installed to the board, but "depmod" should be invoked manually after the modules are installed. |
Copy the newmodules directory to a thumb drive or other accessible media (ftp or NFS will work also), then copy newmodules/lib/modules/2.4.26-ts11/* to your board. See the Linux for ARM on TS-72XX User's Guide#eCos.2FRedBoot redboot instructions for loading a kernel permanently.