TS-7400: Difference between revisions
From embeddedTS Manuals
No edit summary |
|||
Line 1: | Line 1: | ||
{{Infobox | |||
|title = TS-7400 | |||
|image = [[File:TS-7400.jpg|200px]] | |||
|titlestyle = | |||
|headerstyle = background:#ccf; | |||
|labelstyle = width:33% | |||
|datastyle = | |||
|data1 = [http://www.embeddedarm.com/products/board-detail.php?product=TS-7400 Product Page] | |||
|header2 = Documentation | |||
|data3 = [http://www.embeddedarm.com/documentation/ts-7400-schematic.pdf Schematic] | |||
|data4 = [http://www.embeddedarm.com/documentation/ts-7400-mechanical.pdf Mechanical Drawing] | |||
|data5 = [ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7400-linux/ FTP Path] | |||
|header6 = Cirrus Logic EP9302 | |||
|data7 = [http://www.embeddedarm.com/documentation/third-party/ts-7000_ep9301-ug.pdf CPU User Guide] | |||
}} | |||
= UNDER CONSTRUCTION = | = UNDER CONSTRUCTION = | ||
Please pardon our dust as this page is currently being constructed. | Please pardon our dust as this page is currently being constructed. |
Revision as of 23:55, 12 October 2011
Product Page | |
Documentation | |
---|---|
Schematic | |
Mechanical Drawing | |
FTP Path | |
Cirrus Logic EP9302 | |
CPU User Guide |
UNDER CONSTRUCTION
Please pardon our dust as this page is currently being constructed.
Kernel Compile
How to compile a new kernel.
Commands to compile 7260 kernel:
wget ftp://oz.embeddedarm.com/ts-arm-sbc/ts-7260-linux/cross-toolchains/crosstool-linux-gcc-3.3.4-glibc-2.3.2-0.28rc39.tar.bz2
bunzip2 crosstool-linux-gcc-3.3.4-glibc-2.3.2-0.28rc39.tar.bz2
tar -xvf crosstool-linux-gcc-3.3.4-glibc-2.3.2-0.28rc39.tar
wget ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/sources/tskernel-2.4.26-ts11-feb232011.tar.gz
cd linux24
vi Makefile
---> edit CROSS_COMPILE to say:
---> CROSS_COMPILE = /home/mdpeters/ts-7260/usr/local/opt/crosstool/arm-linux/gcc-3.3.4-glibc-2.3.2/bin/arm-linux-
make ts7260_config
make oldconfig
make menuconfig
Add extra kernel drivers as needed ---> WARNING: Compiling drivers into the kernel will make it larger. ---> WARNING: Large kernels may not fit on the kernel partition of the SD card.
make && make modules
make modules_install
mkdir newmodules
INSTALL_MOD_PATH=./newmodules make modules_install
(some systems may not copy the modules this way, if yours does not, use the following workaround)
cp /lib/modules/2.4.26-ts11/* newmodules
(note these may require root privelidges)
copy the newmodules
directory to a thumb drive or other accessible media (ftp or NFS will work also), then copy newmodules/lib/modules/2.4.26-ts11/* to your TS-7400.