TS-7670 DIO

From embeddedTS Manuals
Revision as of 02:04, 3 October 2013 by Kris (talk | contribs) (Initial adding of pins, needs review and fixes)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This board uses CPU DIO, typically there are 4 functions associated with each physical pin (I2C, PWM, SPI, DIO, etc). See the CPU manual for the complete listing and for information on how to control these DIO.

Note that most of the pins start in their "Function" mode and must be set to DIO mode to be able to be used as DIO. Be aware that doing this on a running system may have adverse effects if there are kernel drivers trying to use specific pins in their peripheral mode(s).

Bit masking: Any bits not expressly mentioned here should be masked out. Direction setting: 0 is input, 1 is output.

DIO Location Function
1_7 HD1_14 DC_DIO_4
1_8 HD1_9 DC_DIO_5
1_9 HD1_7 DC_DIO_6
1_10 HD1_1 DC_DIO_7
1_11 HD2_4 DC_DIO_8
1_12 HD2_6 DC_DIO_9
1_13 J7_8, J6_6/7 EN_MODBUS_24V
1_14 CN1_79 MODBUS_FAULT
1_15 CN1_77 EN_MODBUS_3V#
1_16 CN1_73 GPS_PPS_OUT
1_20 CN1_71 PUSH_SW#
1_22 J5_7 UART1_CTS[1]
1_23 J5_8 UART1_RTS[2]
1_27 CN1_65 EN_HOST_USB_5V
3_30 CN1_63 BLUE_LED
1_26 CN2_97 YEL_LED#
0_17 CN1_97 RED_LED#
0_28 CN1_99 GREEN_LED#
3_29 HD1_2 M0_SPI_CS#
3_20 HD1_8 M0_SPI_MOSI
3_21 HD1_6 M0_SPI_MISO
3_23 HD1_4 M0_SPI_CLK
2_18 HD1_10 UART3_RXD [3]
2_19 HD1_12 UART3_TXD
2_16 HD2_3 UART2_RXD [4]
2_17 HD2_1 UART2_TXD
3_01 J4_6 UART0_TXD
3_00 J4_5 UART0_RXD
3_02 J4_7 UART0_CTS
3_3 J4_8 UART0_RTS
3_5 J5_6 UART1_TXD
3_4 J5_5 UART1_RXD
36 MUX_AD_14
37 CN1_64 MUX_AD_15
38 CN2_72 N/A
39 CN2_70 N/S
40 CN2_68 N/A
41 CN2_66 XUART0 CTS
42 CN2_64 XUART1 CTS
43 CN2_62 XUART2 CTS
44 CN2_60 XUART3 CTS
45 CN2_58 XUART4 CTS
46 CN2_56 XUART5 CTS
47 CN2_52 N/A
48 CN2_32 N/A
49 CN1_61 N/A
50 CN1_59 N/A
51 CN1_60 N/A
52 CN1_58 N/A
53 CN2_78 XUART0 TXD
54 CN2_80 XUART0 RXD
55 CN2_82 XUART1 TXD
56 CN2_84 XUART1 RXD
57 CN2_86 XUART2 TXD
58 CN2_88 XUART2 RXD
59 CN2_90 XUART3 TXD
60 CN2_92 XUART3 RXD
61 CN2_94 XUART4 TXD
62 CN2_96 XUART4 RXD
63 CN2_98 XUART5 TXD
64 CN2_100 XUART5 RXD
65 CN2_67 SPI_MOSI
66 CN2_71 SPI_CLK
67 CN2_69 SPI_MISO
68 CN2_65 SPI_FRM
69 CN1_4 N/A
  1. Not peripheral controlled
  2. Not peripheral controlled
  3. Input only, 5v tolerant
  4. Input only, 5v tolerant