TS-7670 LEDs: Difference between revisions
From embeddedTS Manuals
(Created page with "On all of our baseboards we include 2 indicator LEDs which are under software control. You can manipulate these using "tshwctl --greenledon --redledon" or "tshwctl --greenled...") |
(Remove use of macrocontroller) |
||
(3 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
On all of our | On all of our SBCs we include 2 indicator LEDs which are under software control. You can manipulate these using <code>tshwctl --greenledon --redledon</code> or <code<tshwctl --greenledoff --redledoff</code>. The LEDs have 4 behaviors from default software. | ||
{|class=wikitable | {|class=wikitable | ||
Line 20: | Line 20: | ||
| Off | | Off | ||
| Off | | Off | ||
| The SBC is not able to boot. Typically either the board is not being supplied with enough voltage, or the SBC has been otherwise damaged. If a stable voltage is being provided and the supply is capable of providing at least 1A to the SBC, an [http://www. | | The SBC is not able to boot. Typically either the board is not being supplied with enough voltage, or the SBC has been otherwise damaged. If a stable voltage is being provided and the supply is capable of providing at least 1A to the SBC, an [http://www.embeddedTS.com/about/rma.php RMA] is suggested. | ||
|- | |- | ||
| Blinking about 5ms on, about 10ms off. | | Blinking about 5ms on, about 10ms off. | ||
| Blinking about 5ms on, about 10ms off. | | Blinking about 5ms on, about 10ms off. | ||
| The | | The platform is receiving too little power, or something is drawing too much current from the power rails. | ||
|} | |} | ||
Latest revision as of 17:59, 12 June 2023
On all of our SBCs we include 2 indicator LEDs which are under software control. You can manipulate these using tshwctl --greenledon --redledon
or <code<tshwctl --greenledoff --redledoff. The LEDs have 4 behaviors from default software.
Green Behavior | Red behavior | Meaning |
---|---|---|
Solid On | Off | System is booted and running |
Solid On | On for approximately 15s, then off | Once the system has booted the kernel and executed the startup script, it will check for a USB device and then determine if it is a mass storage device. This is used for updates/blasting through USB. Once it determines this is not a mass storage device the red LED will turn back off. |
On for 10s, off for 100ms, and repeating | Turns on after Green turns off for 300ms, and then turns off for 10s | The watchdog is continuously resetting the board. This happens when the system cannot find a valid boot device, or the watchdog is otherwise not being fed. This is normally fed by tshwctl once a valid boot media has started. See the #Watchdog section for more details. |
Off | Off | The SBC is not able to boot. Typically either the board is not being supplied with enough voltage, or the SBC has been otherwise damaged. If a stable voltage is being provided and the supply is capable of providing at least 1A to the SBC, an RMA is suggested. |
Blinking about 5ms on, about 10ms off. | Blinking about 5ms on, about 10ms off. | The platform is receiving too little power, or something is drawing too much current from the power rails. |