TS-9420: Difference between revisions
No edit summary |
|||
| Line 19: | Line 19: | ||
== TS-9420-X86-5 == | == TS-9420-X86-5 == | ||
Please contact Technologic Systems for more information on this. | |||
== TS-9420-X86-3 == | == TS-9420-X86-3 == | ||
Please contact Technologic Systems for more information on this. | |||
= DIP Switches = | = DIP Switches = | ||
Revision as of 15:53, 4 March 2012
 | |
| Product Page | |
| Documentation | |
|---|---|
| Schematic |
Overview
The TS-9420 is a production tool used for mass replicating software on the Technologic Systems' ARM and X86 series of Single Board Computers. It can be used in conjunction with the TS-9422 POST Code Display Board in order to provide additional information during programming.
Getting Started
TS-9420-ARM
Using the TS-9420 in conjunction with a TS-72XX series board you can recover from almost any state. While you can use an NFS root with a bad debian filesystem with a board, the TS-9420 will even allow you to boot a system that otherwise has a corrupt redboot. To boot to the TS-9420, most commonly you will want dip switches 1 and 2 down, with the rest up. This will boot to the TS-9420, and set it in ARM mode.
TS-9420-X86-5
Please contact Technologic Systems for more information on this.
TS-9420-X86-3
Please contact Technologic Systems for more information on this.
DIP Switches
| Switch | Up | Down |
|---|---|---|
| 1 | Boot from SBC | Boot from 9420 |
| 2 | X86 Mode | ARM Mode |
| 3 | Disable Writing to 9420 | Write Enable 9420 Flash |
| 4 | Reserved | Reserved |
| 5 | Reserved | Reserved |