TS-9420
From embeddedTS Manuals
Product Page | |
Documentation | |
---|---|
Schematic |
Overview
The TS-9420 is a production tool used for mass replicating software on the Technologic Systems' ARM and X86 series of Single Board Computers. It can be used in conjunction with the TS-9422 POST Code Display Board in order to provide additional information during programming.
Getting Started
TS-9420-ARM
Using the TS-9420 in conjunction with a TS-72XX series board you can recover from almost any state. While you can use an NFS root with a bad debian filesystem with a board, the TS-9420 will even allow you to boot a system that otherwise has a corrupt redboot. To boot to the TS-9420, most commonly you will want dip switches 1 and 2 down, with the rest up. This will boot to the TS-9420, and set it in ARM mode.
TS-9420-X86-5
todo
TS-9420-X86-3
todo
DIP Switches
Switch | Up | Down |
---|---|---|
1 | Boot from SBC | Boot from 9420 |
2 | X86 Mode | ARM Mode |
3 | Disable Writing to 9420 | Write Enable 9420 Flash |
4 | Reserved | Reserved |
5 | Reserved | Reserved |