TS-SER1: Difference between revisions
From embeddedTS Manuals
m (FTP links auto-updated (http://www.embeddedarm.com/documentation/ → https://cdn.embeddedarm.com/resource-attachments/)) |
m (Links auto-updated for 2022 re-branding ( http://www.embeddedarm.com/products/board-detail.php?product=TS-SER1 → http://www.embeddedTS.com/products/board-detail.php?product=TS-SER1 https://cdn.embeddedarm.com/resource-attachments/ts-ser1-schematic.pdf → https://cdn.embeddedTS.com/resource-attachments/ts-ser1-schematic.pdf)) |
||
Line 6: | Line 6: | ||
|labelstyle = width:33% | |labelstyle = width:33% | ||
|datastyle = | |datastyle = | ||
|data1 = [http://www. | |data1 = [http://www.embeddedTS.com/products/board-detail.php?product=TS-SER1 Product Page] | ||
|header2 = Documents | |header2 = Documents | ||
|data3 = [https://cdn. | |data3 = [https://cdn.embeddedTS.com/resource-attachments/ts-ser1-schematic.pdf Schematic] | ||
}} | }} | ||
Revision as of 17:43, 17 January 2022
Product Page | |
Documents | |
---|---|
Schematic |
Overview
The TS-SER1 is a daughter card that features a PC/104 connector/bus and provides a standard 16550-compatible RS-232 serial port through a 10-pin header.
Features
- 1 PC/AT Serial COM Port
- COM port can be configured as COM3, COM4, or COM5
- Jumper configurable IRQ (IRQ 4,5,6,7,9 available)
- 16550 type UART with 16 byte FIFOs
- Up to 115.2Kbaud
- RS-232 output uses standard 10 pin header
- Dimensions: 3.5 inches x 1.4 inches
- Power requirements: nominally 20mA @ 5V
- PC/104 compatible
- Extended Temperature ( -40° to +85°C ) model available
Getting Started
See your SBC's PC104 section for information on the ISA 16550 driver and getting a connection to the COM device.
COM/IO Selection
COM | Address |
---|---|
COM3 | 3E8 |
COM4 | 2E8 |
COM5 | 3A8 |
Pin Outs
Pin Number | Signal Name |
---|---|
1 | DCD |
2 | Receive Data |
3 | Transmit Data |
4 | DTR |
5 | Signal Ground |
6 | DSR |
7 | RTS |
8 | CTS |
9 | RI |