TS-TPC-7990 SATA: Difference between revisions
From embeddedTS Manuals
No edit summary |
(Reworded note about sata, grammar) |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
The i.MX6 Quad and Dual include integrated SATA II support. This interface has been tested to provide 135MiB/s write, and 170MiB/s read | {{Note|SATA is functional on Rev. B or newer PCBs.}} | ||
SATA is located on the mini PCIe header on the TS-7990. This is intended to be used with mSATA style drives to provide fast embedded storage. | |||
The i.MX6 Quad and Dual include integrated SATA II support. This interface has been tested to provide 135MiB/s write, and 170MiB/s read in sequential accesses. In linux this is accessed through the /dev/sda device: | |||
<pre> | <pre> | ||
[ 1.768036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) | [ 1.768036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) | ||
| Line 12: | Line 15: | ||
[ 1.847381] sd 0:0:0:0: [sda] Attached SCSI dis | [ 1.847381] sd 0:0:0:0: [sda] Attached SCSI dis | ||
</pre> | </pre> | ||
U-Boot includes a script to boot off of a SATA drive. The SATA drive should be formatted just like the SD card examples. In U-Boot run: | |||
<source lang=bash> | |||
env set bootcmd 'run sataboot;' | |||
env save | |||
</source> | |||
This will ignore the SD boot jumper and boot directly to SATA. | |||
Latest revision as of 14:05, 28 September 2018
| Note: | SATA is functional on Rev. B or newer PCBs. |
SATA is located on the mini PCIe header on the TS-7990. This is intended to be used with mSATA style drives to provide fast embedded storage.
The i.MX6 Quad and Dual include integrated SATA II support. This interface has been tested to provide 135MiB/s write, and 170MiB/s read in sequential accesses. In linux this is accessed through the /dev/sda device:
[ 1.768036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.785377] ata1.00: ATA-8: MKNSSDAT30GB-DX, 507ABBF0, max UDMA/133 [ 1.791716] ata1.00: 58626288 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.805380] ata1.00: configured for UDMA/133 [ 1.810320] scsi 0:0:0:0: Direct-Access ATA MKNSSDAT30GB-DX 507A PQ: 0 ANSI: 5 [ 1.819459] sd 0:0:0:0: [sda] 58626288 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 1.827427] sd 0:0:0:0: [sda] Write Protect is off [ 1.832812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.843621] sda: sda1 [ 1.847381] sd 0:0:0:0: [sda] Attached SCSI dis
U-Boot includes a script to boot off of a SATA drive. The SATA drive should be formatted just like the SD card examples. In U-Boot run:
env set bootcmd 'run sataboot;'
env save
This will ignore the SD boot jumper and boot directly to SATA.