TS-TPC-7990 Specifications: Difference between revisions
No edit summary |
No edit summary |
||
| Line 78: | Line 78: | ||
| 0.3 * [[#Rail Specifications|3.3V Rail]] | | 0.3 * [[#Rail Specifications|3.3V Rail]] | ||
| 0.7 * [[#Rail Specifications|3.3V Rail]] | | 0.7 * [[#Rail Specifications|3.3V Rail]] | ||
| | | 120ohm | ||
|- | |- | ||
| External FPGA GPIO | | External FPGA GPIO | ||
| | | | ||
| | | | ||
| | | | ||
| | | | ||
| | | | ||
| Line 100: | Line 100: | ||
! Typ voltage | ! Typ voltage | ||
! Current Available | ! Current Available | ||
! Location | |||
|- | |- | ||
| 3.3V | | 3.3V | ||
| Line 106: | Line 107: | ||
| 3.36 | | 3.36 | ||
| 1A | | 1A | ||
| mPCIE/mSATA, HD8 pin 8 | |||
|- | |- | ||
| 5V | | 5V | ||
| | | 4.0 | ||
| | | | ||
| | | | ||
| Quad core 0.5A, Solo 1.5A <ref>Only relevant if 8-28V is supplied into the board. 5V will not </ref> | | Quad core 0.5A, Solo 1.5A <ref>Only relevant if 8-28V is supplied into the board. 5V will not </ref> | ||
| HD8 pin 2/4, USB, mPCIE/mSATA | |||
|} | |} | ||
Revision as of 17:54, 23 August 2016
Power Specifications
The TS-TPC-7990 includes 2 methods for powering the board. There is a 5V input, and a 8-28V input.
| Input | Min voltage | Max voltage |
|---|---|---|
| 5V input | ||
| 8-28V Input |
Temperature Specifications
There are several different models which will have different operating temperatures and storage temperatures:
| Model Number | Operating Min | Operating Max | Storage Min | Storage Max |
|---|---|---|---|---|
| TS-TPC-7990-LRES | ||||
| TS-TPC-7990-HRES | ||||
| TS-TPC-7990-PCAP | ||||
| TS-TPC-7990-HRES-DEV | ||||
| TS-TPC-7990-PCAP-DEV |
IO Specifications
The GPIO external to the board are all nominally 3.3V, but will vary depending on if they are CPU/FPGA pins.
The CPU pins can be adjusted in software and will have initial values in the device tree. This lets you adjust the drive strength, and pull strength of the IO. See the device tree for your kernel for further details on a specific IO.
The FPGA IO cannot be adjusted further in software.
| IO | Typical Range | Absolute Range | Logic Low | Logic high | Drive strength |
|---|---|---|---|---|---|
| External CPU GPIO | 0-3.3V | -0.5V to 3.3V Rail + 0.3V | 0.3 * 3.3V Rail | 0.7 * 3.3V Rail | 120ohm |
| External FPGA GPIO |
Rail Specifications
The TS-TPC-7990 generates all rails from either the 8-28VDC input, or the 5V input. This table does not document every rail. This will only cover those that can provide power to an external header for use in an application.
| Rail | Min voltage | Max voltage | Typ voltage | Current Available | Location |
|---|---|---|---|---|---|
| 3.3V | 3.36 | 1A | mPCIE/mSATA, HD8 pin 8 | ||
| 5V | 4.0 | Quad core 0.5A, Solo 1.5A [1] | HD8 pin 2/4, USB, mPCIE/mSATA |
- ↑ Only relevant if 8-28V is supplied into the board. 5V will not
Certifications and Testing
- [ Emissions testing report]
- [ Halt Testing]