TS-TPC-8390-4700: Difference between revisions
(Created page with "{{Infobox |title = TS-TPC-8390 |image = 200px |titlestyle = |headerstyle = background:#ccf; |labelstyle = width:33% |datastyle ...") |
No edit summary |
||
Line 37: | Line 37: | ||
See the [[TS-4700]] page for more details on dealing with the functionality of the macrocontroller. | See the [[TS-4700]] page for more details on dealing with the functionality of the macrocontroller. | ||
= | = Features = | ||
== COM ports == | == COM ports == | ||
{| class="wikitable" | {| class="wikitable" | ||
Line 120: | Line 120: | ||
| Dedicated to Only RX | | Dedicated to Only RX | ||
|} | |} | ||
== USB A Header == | |||
{{:8390 USB}} | |||
See the [[TS-4700#USB Host]] section for more details. | |||
== USB Pin Header == | |||
{{:8390 usb pins}} | |||
See the [[TS-4700#USB Host]] section for more details. | |||
== COM1 Header == | |||
{| | |||
! Pinout | |||
! Header | |||
|- | |||
| | |||
{| class="wikitable" | |||
|- | |||
! Pin | |||
! Name | |||
|- | |||
| 1 | |||
| [[TS-4700#XUARTS|XUART0 RS485+]] | |||
|- | |||
| 2 | |||
| [[TS-4700#XUARTS|XUART1 RS232 RX]] | |||
|- | |||
| 3 | |||
| [[TS-4700#XUARTS|XUART1 RS232 TX]] | |||
|- | |||
| 4 | |||
| [[TS-4700#CAN|CAN_H]] | |||
|- | |||
| 5 | |||
| Ground | |||
|- | |||
| 6 | |||
| [[TS-4700#XUARTS|XUART0 RS485-]] | |||
|- | |||
| 7 | |||
| [[TS-4700#XUARTS|XUART2 RS232 TX]] | |||
|- | |||
| 8 | |||
| [[TS-4700#XUARTS|XUART2 RS232 RX]] | |||
|- | |||
| 9 | |||
| [[TS-4700#CAN|CAN_L]] | |||
|- | |||
| 10 | |||
| Not connected | |||
|} | |||
| | |||
{| class="wikitable" | |||
|- | |||
| 10 | |||
| 5 | |||
|- | |||
| 9 | |||
| 4 | |||
|- | |||
| 8 | |||
| 3 | |||
|- | |||
| 7 | |||
| 2 | |||
|- | |||
| 6 | |||
| 1 | |||
|} | |||
|} | |||
{{Note|XUART0 can be switched out for the ttyS0 console port by setting the Console Enable jumper.}} |
Revision as of 15:47, 29 June 2012
Released Mar. 2011 | |
Product Page | |
Documentation | |
---|---|
Schematic | |
TS-8390 Mechanical Drawing | |
TS-TPC-8390 Mechanical Drawing |
Overview
The TS-TPC-8390 is a complete touch panel computer solution comprised of a 7" TFT LCD, TS-8390 baseboard and a choice of macrocontroller CPUs. It is an ideal solution for applications requiring a touch screen human machine interface (HMI), such as industrial automation, home automation, self-service machines, and point-of-sale terminals. This product offers an excellent value with a full range of features and industry standard connectors and a fanless, low power, high performance modular design. TS-TPC-8390 also provides an upgrade path for Technologic Systems' customers currently using TS-TPC-7390 and TS-TPC-7395 products.
TS-4700
See the TS-4700 page for functionality regarding the CPU, FPGA, and OS.
Marvell PXA166 800MHz ARM9 |
Getting Started
The TS-8390 board has no specific boot sequence since the processor and Linux Operating System are located on the selected TS-4000 Series Macrocontroller. For the rest of the boot and setup procedure, please refer to the manual for the selected TS-4000 series Macrocontroller you are using.
Before attempting to apply power to the TS-8390, perform the following steps while taking proper static discharge precautions
- Place the TS-8390 base board on a firm non-conductive surface.
- Alternatively on the provided stand.
- Carefully, insert the TS-4000 Series Macrocontroller daughterboard by aligning and pressing evenly and firmly onto the pair of mating connectors.
- If ordered together these will already come preassembled.
- Connect the RC-DB9 to the 10 pin COM1 header lining up the red wire to the white dot on the board.
- Connect the Ethernet cable if applicable.
- Make sure the jumper is on the "Console Enable" pins, and connect the "SD Boot" pins for the full X11 interface.
- Apply 5-28V of power to the two power pins. Please note the polarity printed on the board.
- Monitor the TS-SOCKET SBC using a terminal emulator connected to the serial console port to verify that the board is operating properly
See the TS-4700 page for more details on dealing with the functionality of the macrocontroller.
Features
COM ports
Port | Type | Source | RX (or 485 +) | TX (or 485 -) | TX Enable | Notes |
---|---|---|---|---|---|---|
ttyS0 | TTL | CPU | DIO Header pin 8 | DIO Header pin 7 | N/A | The TS-9445 brings out an RS232 port |
ttyS0 | RS232 | CPU | COM1 Header pin 2, Expansion Header pin 3 | COM1 Header pin 3, Expansion Header pin 5 | N/A | console enable jumper on |
XUART0 | RS485 | FPGA | COM1 Header pin 1, Expansion Header pin 16 | COM1 Header pin 6, Expansion Header pin 14 | Used by U18 | |
XUART1 | RS232 | FPGA | COM1 Header pin 2, Expansion Header pin 3 | COM1 Header pin 3, Expansion Header pin 5 | N/A | console enable jumper off |
XUART2 | RS232 | FPGA | COM1 Header pin 8, Expansion Header pin 1 | COM1 Header pin 7, Expansion Header pin 6 | N/A | |
XUART3 | RS232 | FPGA | COM2 Header pin 2, Expansion Header pin 9 | COM2 Header pin 3, Expansion Header pin 12 | N/A | |
XUART4 | RS485 | FPGA | COM2 Header pin 1, Expansion Header pin 4 | COM2 Header pin 6, Expansion Header pin 2 | Used by U19 | |
XUART5 | RS232 | FPGA | COM2 Header pin 8, DIO Header pin 5 | COM2 Header pin 7, Expansion Header pin 10 | N/A | |
XUART6 | RS485 | FPGA | COM2 Header pin 6, Expansion Header pin 2 | COM2 Header pin 1, Expansion Header pin 4 | Dedicated to Only RX |
USB A Header
The TS-TPC-8390 has 2 USB host ports on the USB type A connector.
|
See the TS-4700#USB Host section for more details.
USB Pin Header
This is a 2x5 pin header which can be used to bring out a USB host using a CB-USB-AF5P.
|
|
See the TS-4700#USB Host section for more details.
COM1 Header
Pinout | Header | ||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Note: | XUART0 can be switched out for the ttyS0 console port by setting the Console Enable jumper. |