Template:BaseboardID
From embeddedTS Manuals
All of our default baseboards contain a hard wired 3-state 8-input multiplexers. This is not required to implement in custom baseboards, but it can be useful to identify the board in software. During startup of the macrocontroller 4 DIO are used to obtain the baseboard model id. The red LED (CN2_06) is state 0, green LED (CN2_08) is state 1, BUS_DIR (CN1_98) is state 2, and BD_ID_DATA (CN1_83) is used for data.
You can find example code for accessing the baseboard ID in {{{1}}}. For example, "{{{1}}} -B" will return "baseboard_model=" with the detected baseboard.
For custom baseboards we have reserved the address 42 which will never be used by our standard products.
ID | Baseboard |
---|---|
0 | TS-8200 |
1 | Reserved |
2 | TS-TPC-8390 |
4 | TS-8500 |
5 | TS-8400 |
6 | TS-8160 |
7 | TS-8100 |
8 | TS-8820-BOX |
9 | TS-TPC-8920 |
10 | TS-TPC-8900 |
11 | TS-8290 |
13 | TS-8700 |
14 | TS-8280 |
15 | TS-8380 |
16 | TS-AN20 |
255 | TS-8200 |