TS-8390-47xx DIO Header

From embeddedTS Manuals

The DIO header is a 0.1" pitch 2x40 header.

DIO Header Pinout
Pin Description
1 FPGA TDO [1]
2 FPGA TMS [1]
3 Ground
4 FPGA TDI [1]
5 RS232 XUART 5 RXD
6 FPGA TCk [1]
7 TTL DEBUG_TXD
8 TTL DEBUG_RXD
9 SPI_MISO
10 3.3V Supply
11 SPI_CS2#
12 BUF_SPI_MOSI
13 BUF_SPI_CS1#
14 BUF_SPI_CLK#
15 5V Supply
16 EXT_RESET# [2]
17 MFP_48
18 Ground
19 DIO_28
20 DIO_26
21 DIO_08
22 DIO_24
23 DIO_09
24 DIO_23
25 DIO_22
26 DIO_02
27 DIO_03
28 DIO_01
29 DIO_04
30 DIO_00
31 MFP_37
32 MFP_45
33 MFP_54
34 MFP_42
35 DIO_27
36 MFP_44
37 I2C_DAT
38 MFP_39
39 I2C_CLK
40 MFP_46
TS-8390-DIO.png
  1. ↑ 1.0 1.1 1.2 1.3 The FPGA JTAG pins are only intended for production. Use of these for reprogramming the FPGA is not recommended or supported. See the #FPGA Programming section for more information about the supported mechanism for reloading the FPGA.
  2. ↑ Pull low to reset the CPU. Do not drive high (use open drain).
Retrieved from "http://docs.embeddedTS.com/index.php?title=TS-8390-47xx_DIO_Header&oldid=4557"