TS-IRIDIUM Status Codes
From embeddedTS Manuals
- AT+SBDIX Status Codes
- <these come from the gateway>
- 0: MO message successful send.
- 1: MO message sent successful, but the MT message queue was too big to receive.
- 2: MO message sent, but requested location update was not accepted.
- 3-4:Reserved, but indicates MO session success.
- 5-8:Reserved, but indicates MO session failure.
- 10: Gateway reported timeout.
- 11: MO message queue full at gateway.
- 12: MO message has too many segments.
- 13: Gateway reported session did not complete.
- 14: Invalid segment size.
- 15: Access Denied!
- <these come from the transceiver>
- 16: Transceiver is locked and may not make SBD calls (see +CULK). AKA call the service provider.
- 17: Gateway not responding (local session timeout).
- 18: Connection lost (RF drop).
- 19-31: Reserved, but indicate MO session failed.
- 32: No network service, unable to initiate call.
- 33: Antenna fault, unable to initiate call.
- 34: Radio is disabled, unable to initiate (turn on the radio with at*r1).
- 35: Transceiver is busy, try again (transceiver is probably doing auto-negotiation).
- 36: Reserved, but indicates failure.