TS-12W
From embeddedTS Manuals
Released Mar. 2004 | |||||
Product Page | |||||
Documents | |||||
---|---|---|---|---|---|
Schematic | |||||
Power Requirements | |||||
Up to 2.4 Amps @ +5V DC | |||||
Operating Temperature | |||||
| |||||
Mechanical | |||||
22.5mm X 90mm X 100mm (W x H x D) |
Overview
The TS-12W is a 12 watt power supply that provides regulated +5 VDC to a single board computer via the PC/104 bus. Two PC/104 mounting holes are provided to allow the TS-12W to be positioned as the top board on the PC/104 stack and provide power to the entire stack. Safety features include over-current limit, thermal shutdown and reverse polarity protection. Ferrite beads and capacitor filters allow the TS-12W coupled with a single board computer to operate well in industrial environments. The LED indicates status of +5 VDC output.
Features
- LED to indicate status of +5VDC output
- Regulated +5VDC is provided to a single board computer via the PC/104 bus (2.4 Amps max)
- Remote shutdown input allows external control of +5VDC output voltage.
- TTL compatible input:
- Logic 1 = 5 volt off
- Logic 0 = 5 volt on
- Open = 5 vold on
- TTL compatible input:
- Highly efficient switching power supply produces very low heat
- Lockout circuit prevents operation when input voltage is below 10VDC
- Reverse polarity protection and ferrite noise suppression
- 10-340VDC input voltage has quick disconnect with screw terminals