Lts kernel compile 5.10 imx6 configure
Configure environment variables needed for building. This specifies the architecture, the cross compiler that is being used, the U-Boot kernel address, and to set up building the kernel modules for the WILC3000 Wi-Fi/BLE module:
export CROSS_COMPILE=arm-linux-gnueabihf- # This may be different if using a different compiler!
export ARCH=arm
export LOADADDR=0x10008000
export WILC=y
The WILC3000 Wi-Fi/BLE drivers are maintained and built externally out of the kernel tree. Clone this tree inside of the linux-lts/
directory (this is built later):
git clone https://github.com/embeddedTS/wilc3000-external-module/
Next, set the default configuration for this platform. Note that a minimal defconfig and a full-feature defconfig are available. The minimal defconfig contains options for supporting the device and a few common peripherals and technologies. While the full defconfig includes much more support for things like USB devices, a more broad range of netfilter/iptables filter module support, etc.
make tsimx6_defconfig
# The minimal defconfig can alternately be used with:
# make tsimx6_minimal_defconfig