Prep customer image

From embeddedTS Manuals

It is usually desired to create a golden image to use for unit production after development is complete. This process can vary greatly from application to application but there are a few steps that are going to be most often wanted. These include cleaning up temporary files, removing files that should be unique and re-generated on the first boot (SSH keys, machine-id files, etc.), setting up the hostname, and so on. We have created a script that will automate most of this process and provides hooks for additional scripts to be called as well. The script is simply passed the device node of the development disk or an existing .dd file. From this, it will create a new .dd file based on the partition scheme with all modifications made to the new image. The image source is left completely untouched and is read only. The script also assumes that the last partition on the disk is the bootable linux partition. If this is not the case or there are multiple partitions that are used in the end application, the script will need to be modified in order to accommodate this fact.

Note: The script uses output from various commands. The output format of linux utilities can vary greatly from distribution to distribution, or even within versions of the distribution. It is strongly recommended to verify the final processed image contains everything necessary for the application and that all processes completed without issue.


The simplest use of the script is:

./prep_customer_image /dev/sdX <output base name>

Note that "/dev/sdX" will need to be changed accordingly. Be sure to pass the whole disk and not just a partition.

The "<output base name>" is used as the base for all files output. For example, if "TechnologicSystems-latest" was used, then the compressed tarball output would be named "TechnologicSystems-latest.tar.bz2" (or it may end with ".tar.xz" depending on the compression used by the script). If no base name is provided, then the current date is used.

Additionally, there are two hooks available in the 'prep_customer_image' script, "prep" and "post". The top of the file has two variables, `PREP_SCRIPTS=""` and `POST_SCRIPTS=""`. Adding in a space separated list of script names to those variables will cause them to be called in order. For example, setting `PREP_SCRIPTS="add_application change_hostname"` will cause the 'prep_customer_image' script to run through its initial steps, then call './add_application', then call './change_hostname', and then will continue with the rest of the script steps.

Every script for "prep" and "post" is called with a single argument, the name of the image file. This specifically will be "<output base name>.dd". At the time of calling the prep scripts, the folder "./mount_point/" will have the last partition of the image file mounted as read/write. It is not wise to modify the image file directly since it is already mounted. All of the post scripts are called after the last partition of the image file is unmounted. This can be useful for creating additional file outputs, extracting specific partition images, etc., from the image itself. We have used these hooks in the past to remove special files and create additional images for our DoubleStore based devices.

It is also possible to run this script directly on the device when booted. This can be used to take an image of eMMC for example, when booted from the SD card. We always recommend doing initial development on SD, creating an image from that on a host PC, and then transferring it to the eMMC. This process makes development and image creation faster. If using the 'prep_customer_image' script from a booted device, be sure there is enough free space as the script creates a disk image of the target disk and then copies that in to a tarball, compressing everything as the final step.