TS-4100 u-boot output

This platform includes U-Boot as the bootloader to load and boot the full operating system. The i.MX6UL processor loads U-Boot from the eMMC flash at power-on. U-Boot allows booting images from the microSD, eMMC, NFS, or USB. U-Boot is a general purpose bootloader that is capable of booting into common Linux distributions, Android, QNX, or others.

On a normal boot, output from U-Boot will be similar to the following:

U-Boot 2016.03-00367-gb3ce405827 (Jul 02 2019 - 16:40:10 -0700)

CPU:   Freescale i.MX6UL rev1.1 at 396 MHz
Reset cause: POR
Board: Technologic Systems TS-4100
FPGA:  Rev 11
Silab: Rev 2
I2C:   ready
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Baseboard ID: 0x8
Baseboard Rev: 0
Net:   FEC0 [PRIME]
Press Ctrl+C to abort autoboot in 1 second(s)
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
No storage devices, perhaps not 'usb start'ed..?
Booting from the SD card ...
** File not found /boot/boot.scr **
** File not found /boot/ts4100-fpga.vme **
29205 bytes read in 146 ms (195.3 KiB/s)
8 detected
5244088 bytes read in 390 ms (12.8 MiB/s)
Kernel image @ 0x80800000 [ 0x000000 - 0x5004b8 ]
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 83000000, end 8300a214

Starting kernel ...