TS-7670 Image Changelog

Image File	Changelog	Known Issues
ts7670_7400v2-dec032013.dd.bz2	Initial release
ts7670_7400v2-jan282014.dd.bz2 ts7670_7400v2-jan282014.ubifs	Synced Debian filesystem between TS-7600/TS-4600 and TS-7670/TS-7400_V2 Updates to support Rev A TS-7670 Fixed fsck issue when booting from NAND Added DoubleStore support Sleep and standby support added tshwctl -i now indicates reboot_source= to indicate what caused the last boot
ts7670_7400v2-mar052014.dd.bz2 ts7670_7400v2-mar052014.ubifs	TS-7670 turn on all four LEDs at startup for visual diagnostic purposes Set up routines to control TS-7670 Auto-485 txen Fixed a bug which could cause filesystem_from_* commands to hang Changed NAND sizes to accommodate for maximum factory badblocks	/etc/resolv.conf is a static file in Debian, breaks DNS in Debian if IP obtained in initramfs, and then booted to full Debian.
ts7670_7400v2-may302014.dd.bz2 ts7670_7400v2-may302014.ubifs	Removed rootwait of SD card, we wait for it in initramfs Support for dblstorctl Updates to tshwctl Include CPU ADC read routines Changed mux to make sure USB ID pin stays in place Implement Marvell's workaround for errata 3.1 for 10mbps connections on 4 port switch Added revision output to 7670/7400_V2 Added help output for resetswitch* for all mx28s Renamed 232en and 232dis to *on and *off, old long opt still valid Updates to xuartctl Default to mx28 IRQ when no --irq option is passed Added CFG_CONSOLE_EN option to disable main serial console for security reasons Process running in its place cannot be killed over the console Slightly reorganized the init in order to accommodate the added option Added printing of total RAM available upon bootup Added CFG_DBLSTOR_ROOT config option to allow for making a DoubleStore dataset the Debian root, only when booted from NAND Changed 7670/7400_v2 to turn on CAN and 232 transcievers by default Changed shinit to print boot device Disabled ipv4ll for default case, only used as fallback Removed ethX:0 notation	4th CPU ADC channel not being read properly
ts7670_7400v2-jun272014.dd.bz2 ts7670_7400v2-jun272014.ubifs	Added support for 4th CPU ADC channel	tshwctl has issue that can corrupt I2C bus cycles if tshwctl is called repeatedly
ts7670_7400v2-jul292014.dd.bz2 ts7670_7400v2-jul292014.ubifs	Updated I2C to use i2cdev Fixed bug that can corrupt I2C bus cycles if tshwctl is called repeatedly Redundant "rtc_present=" output removed from tshwctl RTC commands
ts7670_7400v2-jan212015.dd.bz2 ts7670_7400v2-jan212015.ubifs	Added support for TS-7680 Updated compat-drivers for wireless support, no longer using older compat-wireless Set up SPI on TS-7400-V2 Cleaned up GPIO warnings in kernel logs Auto-loading mxs_auart and flexcan Fixed tshwctl bug where a used variable is not initialized in some situations for --get/set/clrdio Forced ordering of SD/MMC in the block driver layer	Extra user account support/support exists on the system and may pose a security risk. Kernel SPI drivers do not function on TS-7400-V2 Rev B PCBs
ts7670_7400v2-mar162015.dd.bz2 ts7670_7400v2-mar162015.ubifs ts7670_7400v2-debian-wheezy-arm-mar162015.tar.bz2	Removed call to xuartctl --server which has a very rare chance (1 in 10k as seen in testing) of locking up or causing instability. Added line to give init script a defined stdin/stdout/stderr Added default "unknown" to boardID output Added VLAN support to config for TS-7680 Extra user account support/support has been removed	Kernel SPI drivers do not function on TS-7400-V2 Rev B PCBs Shutdown does not sync system time to RTC. Before shutdown run the command 'tshwctl --setrtc' to sync the time. Added verbosity in the initramfs will produce some benign messages on bootup, these messages are: "sh: you must specify whom to kill" when booting directly to Debian from SD/NAND/eMMC All of the following messages when booting from NAND: "UBI device number 0, total 40 LEBs (20643840 bytes, 19.7 MiB), available 1 LEBs (51609)" "mount: mounting /mnt/root/etc on /etc/ failed: No such file or directory" "umount: can't umount /etc: Invalid argument" "UBI device number 1, total 4015 LEBs (2072125440 bytes, 1.9 GiB), available 110 LEBs)"
ts7670_7400v2-nov272017.dd.bz2 ts7670_7400v2-nov272017.ubifs ts7670_7400v2-debian-wheezy-arm-nov272017.tar.bz2	Enabled platform device for SPI spidev support on the TS-7400-V2 Resolved race condition in the initramfs when attempting to detect a dual card DoubleStore dataset Add kernel cmdline option to force proper NBD partition support Move DoubleStore NBD to unix domain sockets Resolved PHY linking errors with some partners Added support for Rev E TS-7670 PCB Added support for newer eMMC devices