TS-8100 ADC

The Analog to Digital Converter consists of a 4-channel 16 bit sigma-delta converter and two, 2-channel analog switches. These are configured to allow input and conversion on two differential channels and 4 single ended channels. The 6-channel Analog to Digital signals are contained on connector HD5 which is a 16 pin (2x8) 0.1" spacing header. The connector layout and the signals carried by each pin are defined below. The input range for the differential input channels is 0- 2 VDC, and the input range on the single-ended channel is nominally 0-10 VDC.

Pinout	Header
Pin Type Signal 1 Single ended Channel 6 2 N/A GND 3 Single ended Channel 5 4 N/A GND 5 Single ended Channel 4 6 N/A GND 7 Single ended Channel 3 8 N/A GND 9 N/A Not connected 10 N/A GND 11 Differential Channel 2- 12 Differential Channel 2+ 13 N/A GND 14 Differential Channel 1- 15 Differential Channel 1+ 16 N/A GND