TS-8820-leds
From embeddedTS Manuals
The TS-8820 has 27 LEDs used to indicate the electrical status of the inputs and outputs on the device. LEDs are labelled as "LED#" on the PCB silkscreen.
The majority of the LEDs are not able to be directly controlled, they turn on or off as a reaction to the status of the I/O they are connected to. For example, when DIG_OUT1 is set, LED17 will turn on. The "System" LEDs are the exception to this and are controlled via the SoM LED interface.
LED | FUNCTION | --- | LED | FUNCTION |
---|---|---|---|---|
1 | System RED_LED | 2 | Doesn't exist. | |
3 | System Power | 4 | System GREEN_LED | |
5 | RELAY_1 | 6 | RELAY_2 | |
7 | RELAY_3 | 8 | RELAY_4 | |
9 | DIG_IN1 | 10 | DIG_IN2 | |
11 | DIG_IN3 | 12 | DIG_IN4 | |
13 | DIG_IN5 | 14 | DIG_IN6 | |
15 | DIG_IN7 | 16 | DIG_IN8 | |
17 | DIG_OUT1 | 18 | DIG_OUT2 | |
19 | DIG_OUT3 | 20 | DIG_OUT4 | |
21 | DIG_IN9 | 22 | DIG_IN10 | |
23 | DIG_IN11 | 24 | DIG_IN12 | |
25 | DIG_IN13 | 26 | DIG_IN14 | |
27 | DIG_OUT5 | 28 | DIG_OUT6 |