TS-7250-V3 LCD Header

From embeddedTS Manuals
Revision as of 13:17, 27 February 2020 by Mark (talk | contribs) (Created page with "The LCD header is a 0.1" pitch 2x7 header including GPIO. This is designed around compatibility with the HD44780 LCD controller which includes our [https://www.embeddedarm.co...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The LCD header is a 0.1" pitch 2x7 header including GPIO. This is designed around compatibility with the HD44780 LCD controller which includes our LCD-LED.

Signals Pin Layout
Pin Signal
1 GPIO Bank 5 IO 1
2 GND
3 GPIO Bank 5 IO 2
4 Current Sink Output Bank 2 IO 27 [1]
5 GPIO Bank 5 IO 3
6 spidev 0.1 Chip Select
7 GPIO Bank 5 IO 4
8 GPIO Bank 5 IO 5
9 GPIO Bank 5 IO 6
10 spidev 0.1 MISO
11 GPIO Bank 5 IO 7
12 spidev 0.1 MOSI
13 GPIO Bank 5 IO 8
14 spidev 0.1 CLK
15 GPIO Bank 5 IO 9
16 3.3V

TS-7250-V3-DIO Header.svg

  1. ↑ When this pin is a high output it enables a FET to ground.
Retrieved from "http://docs.embeddedTS.com/index.php?title=TS-7250-V3_LCD_Header&oldid=11439"