TS-7670 Image Changelog: Difference between revisions

From embeddedTS Manuals
No edit summary
No edit summary
Line 4: Line 4:
! Known Issues
! Known Issues
|-
|-
| [ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/ts7670_7400v2-dec032013.dd.bz2 ts7670_7400v2-dec032013.dd.bz2]
| [ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/prev_images/ts7670_7400v2-dec032013.dd.bz2 ts7670_7400v2-dec032013.dd.bz2]
|  
|  
*Initial release
*Initial release
|
|
|-
|-
| [ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/ts7670_7400v2-jan282014.dd.bz2 ts7670_7400v2-jan282014.dd.bz2]
| [ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/prev_images/ts7670_7400v2-jan282014.dd.bz2 ts7670_7400v2-jan282014.dd.bz2]
[ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/ts7670_7400v2-jan282014.ubifs ts7670_7400v2-jan282014.ubifs]
[ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/prev_images/ts7670_7400v2-jan282014.ubifs ts7670_7400v2-jan282014.ubifs]
|
|
*Synced Debian filesystem between TS-7600/TS-4600 and TS-7670/TS-7400_V2
*Synced Debian filesystem between TS-7600/TS-4600 and TS-7670/TS-7400_V2
Line 20: Line 20:
|  
|  
|-
|-
| [ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/ts7670_7400v2-mar052014.dd.bz2 ts7670_7400v2-mar052014.dd.bz2]
| [ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/prev_images/ts7670_7400v2-mar052014.dd.bz2 ts7670_7400v2-mar052014.dd.bz2]
[ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/ts7670_7400v2-mar052014.ubifs ts7670_7400v2-mar052014.ubifs]
[ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/prev_images/ts7670_7400v2-mar052014.ubifs ts7670_7400v2-mar052014.ubifs]
|
|
*TS-7670 turn on all four LEDs at startup for visual diagnostic purposes
*TS-7670 turn on all four LEDs at startup for visual diagnostic purposes
Line 30: Line 30:
*/etc/resolv.conf is a static file in Debian, breaks DNS in Debian if IP obtained in initramfs, and then booted to full Debian.
*/etc/resolv.conf is a static file in Debian, breaks DNS in Debian if IP obtained in initramfs, and then booted to full Debian.
|-
|-
| [ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/ts7670_7400v2-may302014.dd.bz2 ts7670_7400v2-may302014.dd.bz2]
| [ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/prev_images/ts7670_7400v2-may302014.dd.bz2 ts7670_7400v2-may302014.dd.bz2]
[ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/ts7670_7400v2-may302014.ubifs ts7670_7400v2-may302014.ubifs]
[ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/prev_images/ts7670_7400v2-may302014.ubifs ts7670_7400v2-may302014.ubifs]
|
|
*Removed rootwait of SD card, we wait for it in initramfs
*Removed rootwait of SD card, we wait for it in initramfs
Line 53: Line 53:
*Disabled ipv4ll for default case, only used as fallback
*Disabled ipv4ll for default case, only used as fallback
*Removed ethX:0 notation
*Removed ethX:0 notation
|
* 4th CPU ADC channel not being read properly
|-
|[ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/ts7670_7400v2-may302014.dd.bz2 ts7670_7400v2-may302014.dd.bz2]
[ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7670-linux/binaries/ts-images/ts7670_7400v2-may302014.ubifs ts7670_7400v2-may302014.ubifs]
|
* Added support for 4th CPU ADC channel
|
|
|}
|}

Revision as of 14:14, 22 July 2014

Image File Changelog Known Issues
ts7670_7400v2-dec032013.dd.bz2
  • Initial release
ts7670_7400v2-jan282014.dd.bz2

ts7670_7400v2-jan282014.ubifs

  • Synced Debian filesystem between TS-7600/TS-4600 and TS-7670/TS-7400_V2
  • Updates to support Rev A TS-7670
  • Fixed fsck issue when booting from NAND
  • Added DoubleStore support
  • Sleep and standby support added
  • tshwctl -i now indicates reboot_source= to indicate what caused the last boot
ts7670_7400v2-mar052014.dd.bz2

ts7670_7400v2-mar052014.ubifs

  • TS-7670 turn on all four LEDs at startup for visual diagnostic purposes
  • Set up routines to control TS-7670 Auto-485 txen
  • Fixed a big which could cause filesystem_from_* commands to hang
  • Changed NAND sizes to accommodate for maximum factory badblocks
  • /etc/resolv.conf is a static file in Debian, breaks DNS in Debian if IP obtained in initramfs, and then booted to full Debian.
ts7670_7400v2-may302014.dd.bz2

ts7670_7400v2-may302014.ubifs

  • Removed rootwait of SD card, we wait for it in initramfs
  • Support for dblstorctl
  • Updates to tshwctl
    • Include CPU ADC read routines
    • Changed mux to make sure USB ID pin stays in place
    • Implement Marvell's workaround for errata 3.1 for 10mbps connections on 4 port switch
    • Added revision output to 7670/7400_V2
    • Added help output for resetswitch* for all mx28s
    • Renamed 232en and 232dis to *on and *off, old long opt still valid
  • Updates to xuartctl
    • Default to mx28 IRQ when no --irq option is passed
  • Added CFG_CONSOLE_EN option to disable main serial console for security reasons
    • Process running in its place cannot be killed over the console
  • Slightly reorganized the init in order to accommodate the added option
  • Added printing of total RAM available upon bootup
  • Added CFG_DBLSTOR_ROOT config option to allow for making a DoubleStore dataset the Debian root, only when booted from NAND
  • Changed 7670/7400_v2 to turn on CAN and 232 transcievers by default
  • Changed shinit to print boot device
  • Disabled ipv4ll for default case, only used as fallback
  • Removed ethX:0 notation
  • 4th CPU ADC channel not being read properly
ts7670_7400v2-may302014.dd.bz2

ts7670_7400v2-may302014.ubifs

  • Added support for 4th CPU ADC channel
Retrieved from "http://docs.embeddedTS.com/index.php?title=TS-7670_Image_Changelog&oldid=5461"