| Image File
|
Changelog
|
Known Issues
|
| ts7670_7400v2-dec032013.dd.bz2
|
|
|
| ts7670_7400v2-jan282014.dd.bz2
ts7670_7400v2-jan282014.ubifs
|
- Synced Debian filesystem between TS-7600/TS-4600 and TS-7670/TS-7400_V2
- Updates to support Rev A TS-7670
- Fixed fsck issue when booting from NAND
- Added DoubleStore support
- Sleep and standby support added
- tshwctl -i now indicates reboot_source= to indicate what caused the last boot
|
|
| ts7670_7400v2-mar052014.dd.bz2
ts7670_7400v2-mar052014.ubifs
|
- TS-7670 turn on all four LEDs at startup for visual diagnostic purposes
- Set up routines to control TS-7670 Auto-485 txen
- Fixed a bug which could cause filesystem_from_* commands to hang
- Changed NAND sizes to accommodate for maximum factory badblocks
|
- /etc/resolv.conf is a static file in Debian, breaks DNS in Debian if IP obtained in initramfs, and then booted to full Debian.
|
| ts7670_7400v2-may302014.dd.bz2
ts7670_7400v2-may302014.ubifs
|
- Removed rootwait of SD card, we wait for it in initramfs
- Support for dblstorctl
- Updates to tshwctl
- Include CPU ADC read routines
- Changed mux to make sure USB ID pin stays in place
- Implement Marvell's workaround for errata 3.1 for 10mbps connections on 4 port switch
- Added revision output to 7670/7400_V2
- Added help output for resetswitch* for all mx28s
- Renamed 232en and 232dis to *on and *off, old long opt still valid
- Updates to xuartctl
- Default to mx28 IRQ when no --irq option is passed
- Added CFG_CONSOLE_EN option to disable main serial console for security reasons
- Process running in its place cannot be killed over the console
- Slightly reorganized the init in order to accommodate the added option
- Added printing of total RAM available upon bootup
- Added CFG_DBLSTOR_ROOT config option to allow for making a DoubleStore dataset the Debian root, only when booted from NAND
- Changed 7670/7400_v2 to turn on CAN and 232 transcievers by default
- Changed shinit to print boot device
- Disabled ipv4ll for default case, only used as fallback
- Removed ethX:0 notation
|
- 4th CPU ADC channel not being read properly
|
| ts7670_7400v2-jun272014.dd.bz2
ts7670_7400v2-jun272014.ubifs
|
- Added support for 4th CPU ADC channel
|
- tshwctl has issue that can corrupt I2C bus cycles if tshwctl is called repeatedly
|
| ts7670_7400v2-jul292014.dd.bz2
ts7670_7400v2-jul292014.ubifs
|
- Updated I2C to use i2cdev
- Fixed bug that can corrupt I2C bus cycles if tshwctl is called repeatedly
|
|
