TS-7970 DIO Table
From embeddedTS Manuals
The GPIO numbers in the table below are relevant to how the Linux references these numbers. The CPU documentation refers to bank and IO while Linux flattens this out to one number space.
| CPU PAD [1] | GPIO Number | Common Functions [2] | Location |
|---|---|---|---|
| SD4_DAT3 | 43 | USB HUB Reset# | Onboard |
| DISP0_DAT23 | 145 | SEL_DC_USB# | Onboard |
| EIM_A16 | 54 | EN_USB_5V | Onboard |
| EIM_D27 | 91 | Green LED | Onboard |
| GPIO_2 | 2 | Red LED | Onboard |
| GPIO_9 | 9 | Yellow LED | Onboard |
| DISP0_DAT4 | 121 | Blue LED | Onboard |
| CSI0_DATA_EN | 148 | FPGA_IRQ_0 (FPGA UART irq) | Onboard |
| GPIO_4 | 4 | FPGA_IRQ_1 (unused) | Onboard |
| DISP0_DAT14 | 136 | JTAG_FPGA_TMS | Onboard |
| DISP0_DAT17 | 139 | JTAG_FPGA_TCK | Onboard |
| DISP0_DAT18 | 140 | JTAG_FPGA_TDO | Onboard |
| DISP0_DAT22 | 144 | JTAG_FPGA_TDI | Onboard |
| DISP0_DAT20 | 142 | Gyro IRQ | Onboard |
| EIM_OE | 57 | Modbus fault | Onboard |
| EIM_RW | 58 | SD Boot Jumper | Onboard |
| EIM_A19 | 51 | EN_MODBUS_24V# | Onboard |
| DISP0_DAT5 | 122 | EN_MODBUS_3V# | Onboard |
| EIM_D23 | 87 | EN_RTC_PWR | Onboard |
| DISP0_DAT0 | 117 | EN_CAN_1# | Onboard |
| EIM_BCLK | 191 | EN_CAN_2# | Onboard |
| DISP0_DAT7 | 124 | GPIO | #HD1 pin 7 |
| DISP0_DAT9 | 126 | GPIO | #HD1 pin 21 |
| DISP0_DAT10 | 127 | GPIO | #HD1 pin 9 |
| DISP0_DAT11 | 133 | GPIO | #HD1 pin14 |
| EIM_CS0 | 55 | GPIO | #HD2 pin 5 |
- ↑ The pad name does not often correspond with the functionality of the IO we use, but can be used to reference the pad in the CPU manual.
- ↑ This does not contain all of the functions possible for a pin, but the common functions as they are used on our off the shelf basebords. Consult the i.MX6 CPU Reference manual for a complete list.
The FPGA GPIO can also be accessed through the sysfs API. These are available at GPIOs 224 to 255. Not all of the reserved pins are used on this design, but they will be reserved by the kernel.
| FPGA PAD | GPIO Number |
|---|