TS-7970 PCB Changelog: Difference between revisions

Revision as of 18:01, 8 June 2016

Revision	Changes
A	Initial Release
B	Changed U17 to support the MPU-9250 9 axis accelerometer Changes TVS1 to use 4.7V_A Fix I210 ethernet LED polarity Use 153-ball eMMC to support bigger eMMCs on custom builds Added PU from 5V_A to SW_5V. This prevents a negative leakage on the the SW_5V rail. If the rail has a negative voltage it will otherwise not switch on. CPU pin U4 tied to ground. Used to detect REV B boards.

@@ Line 7: / Line 7: @@
 |
 * Initial Release
+|-
+| B
+|
+* Changed U17 to support the MPU-9250 9 axis accelerometer
+* Changes TVS1 to use 4.7V_A
+* Fix I210 ethernet LED polarity
+* Use 153-ball eMMC to support bigger eMMCs on custom builds
+* Added PU from 5V_A to SW_5V.  This prevents a negative leakage on the the SW_5V rail.  If the rail has a negative voltage it will otherwise not switch on.
+* CPU pin U4 tied to ground.  Used to detect REV B boards.
 |}