TS-7970 Terminal Blocks: Difference between revisions
From embeddedTS Manuals
No edit summary |
No edit summary |
||
Line 78: | Line 78: | ||
<References /> | <References /> | ||
The DIO_1 and DIO_2 IO can be outputs, or inputs. As inputs the digital threshold is 1.2V. To guarantee low it must be < 0.5V, or for high > 2.0V. There is an internal 1.5k pullup to 5V that will bias the input high. | The DIO_1 and DIO_2 IO can be outputs, or inputs. As inputs the digital threshold is 1.2V. To guarantee low it must be < 0.5V, or for high > 2.0V. There is an internal 1.5k pullup to 5V that will bias the input high. As outputs these IO can sink up to 500mA. |
Revision as of 16:51, 27 May 2016
The TS-7970 includes two removable terminal blocks (OSTTJ0811030) for power, UARTs, CAN, and other general purpose IO.
|
|
- ↑ This ground should be used for the power supply since it includes a ferrite bead to help suppress noise.
The DIO_1 and DIO_2 IO can be outputs, or inputs. As inputs the digital threshold is 1.2V. To guarantee low it must be < 0.5V, or for high > 2.0V. There is an internal 1.5k pullup to 5V that will bias the input high. As outputs these IO can sink up to 500mA.