Revision as of 14:29, 23 May 2017

Which macrocontroller are you using?

TS-4800

TS-8100 PCB Revisions

Revision	Changes
A	Initial Release
B	Corrected white dot indicating pin 1 on the USB header
C	Added R41 - improves long term reliability with TS-4200 installed Changed SATA pins on CN2 for compatibility to the TS-4900 Updated baseboard id to indicate revision to software This can be read with the carrier board utility ts4200ctl, ts7500ctl, ts4700ctl, or ts4800ctl with the --info option.

@@ Line 8: / Line 8: @@
 |data2        = [http://www.embeddedarm.com/products/board-detail.php?product=TS-8100 Product Page]
 |header3      = Documentation
-|data4        = [http://www.embeddedarm.com/documentation/ts-8100-schematic_revA.pdf Revision A Schematic]
+|data4        = [http://www.embeddedarm.com/documentation/ts-8100-schematic-reva.pdf Revision A Schematic]
-|data5        = [http://www.embeddedarm.com/documentation/ts-8100-schematic_revB.pdf Revision B Schematic]
+|data5        = [http://www.embeddedarm.com/documentation/ts-8100-schematic-revb.pdf Revision B Schematic]
-|data6        = [http://www.embeddedarm.com/documentation/ts-8100-mechanical.pdf Mechanical Drawing]
+|data6        = [http://www.embeddedarm.com/documentation/ts-8100-schematic.pdf Current Schematic]
-|data7        = [ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-8100/ FTP Path]
+|data7        = [http://www.embeddedarm.com/documentation/ts-8100-mechanical.pdf Mechanical Drawing]
+|data8        = [ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-8100/ FTP Path]
 }}