TS-8100-4500: Difference between revisions
From embeddedTS Manuals
No edit summary |
No edit summary |
||
| Line 66: | Line 66: | ||
| COM3 header pin 2 | | COM3 header pin 2 | ||
| COM3 header pin 3 | | COM3 header pin 3 | ||
| | | | ||
|} | |} | ||
Revision as of 09:21, 24 February 2012
 | |
| Released Mar. 2011 | |
| Product Page | |
| Documentation | |
|---|---|
| REV A Schematic | |
| REV B Schematic | |
| Mechanical Drawing |
COM ports
This board has both a CPU UART for debugging, and up to 7 XUARTs to provide either RS232 or RS485. See the xuartctl page for details on bringing up these ports. The default bitstream only contains 2 XUARTs, so you will need to load a bitstream with more ports to use ports 2-6.
| Port | Type | RX (or 485 +) | TX (or 485 -) | Notes |
|---|---|---|---|---|
| ttyS0 | RS232 | DB9 pin 2, COM1 header pin 2 | DB9 pin 3, COM1 header pin 3 | Only with console enable jumper on |
| XUART0 | RS485 | DB9 pin 1, COM1 header pin 1 | DB9 pin 6, COM1 header pin 6 | |
| XUART1 | RS232 | DB9 pin 2, COM1 header pin 2 | DB9 pin 3, COM1 header pin 3 | Only with console enable jumper off |
| XUART2 | RS232 | DB9 pin 8, COM1 header pin 8 | DB9 pin 7, COM1 header pin 7 | |
| XUART3 | RS232 | COM2 header pin 2 | COM2 header pin 3 | |
| XUART4 | RS485 | COM2 header pin 1 | COM2 header pin 6 | |
| XUART5 | RS232 | COM3 header pin 2 | COM3 header pin 3 |