TS-8900-dioheader: Difference between revisions
From embeddedTS Manuals
(Created page with "The DIO is manipulated through tsctl, or through manipulation of the registers directly. Using tsctl will be the easiest way to communicate with the IO....") |
No edit summary |
||
Line 1: | Line 1: | ||
The DIO is manipulated | The DIO is manipulated through manipulation of the [[#Register Map|registers]] directly. | ||
{| class=wikitable | {| class=wikitable |
Revision as of 12:08, 13 June 2012
The DIO is manipulated through manipulation of the registers directly.
39 | 37 | 35 | 33 | 31 | 29 | 27 | 25 | 23 | 21 | 19 | 17 | 15 | 13 | 11 | 9 | 7 | 5 | 3 | 1 |
40 | 38 | 36 | 34 | 32 | 30 | 28 | 26 | 24 | 22 | 20 | 18 | 16 | 14 | 12 | 10 | 8 | 6 | 4 | 2 |
Pin | Name | Notes |
---|---|---|
1 | N/A | Not Connected |
2 | N/A | Not Connected |
3 | Ground | |
4 | N/A | Not Connected |
5 | N/A | Not Connected |
6 | N/A | Not Connected |
7 | N/A | Not Connected |
8 | N/A | Not Connected |
9 | SPI_MOSI | Controlled by tsctl |
10 | 3.3V | Do not draw more than 12mA |
11 | N/A | Not Connected |
12 | BUF_SPI_MOSI | |
13 | BUF_SPI_CS1# | |
14 | BUF_SPI_CLK | |
15 | 5V | |
16 | EXT_RESET# | Power cycle the whole board |
17 | N/A | Not Connected |
18 | Ground | |
19 | N/A | Not Connected |
20 | N/A | Not Connected |
21 | IN_0 | |
22 | N/A | Not Connected |
23 | IN_1 | |
24 | N/A | Not Connected |
25 | IN_2 | |
26 | OUT_7 | |
27 | IN_3 | |
28 | OUT_6 | |
29 | IN_4 | |
30 | OUT_5 | |
31 | IN_5 | |
32 | OUT_4 | |
33 | IN_6 | |
34 | OUT_3 | |
35 | IN_7 | |
36 | OUT_2 | |
37 | I2C_DAT | See tsctl for usage. |
38 | OUT_1 | |
39 | I2C_CLK | |
40 | OUT_0 |