TS-ADC16: Difference between revisions
From embeddedTS Manuals
(I hate wikicode so much. First header description table done. TODO: Everything else.) |
(Added table Header AD2. TODO: Everything else.) |
||
Line 108: | Line 108: | ||
!D-IN3 | !D-IN3 | ||
|} | |} | ||
{|class="wikitable" | |||
|+Header AD2 | |||
|- | |||
!gnd | |||
!gnd | |||
!gnd | |||
!gnd | |||
!gnd | |||
!gnd | |||
!gnd | |||
!gnd | |||
!gnd | |||
!gnd | |||
!gnd | |||
!gnd | |||
!gnd | |||
|- | |||
|PIN-02 | |||
|PIN-04 | |||
|PIN-06 | |||
|PIN-08 | |||
|PIN-10 | |||
|PIN-12 | |||
|PIN-14 | |||
|PIN-16 | |||
|PIN-18 | |||
|PIN-20 | |||
|PIN-22 | |||
|PIN-24 | |||
|PIN-26 | |||
|- | |||
|*PIN-01 | |||
|PIN-03 | |||
|PIN-05 | |||
|PIN-07 | |||
|PIN-09 | |||
|PIN-11 | |||
|PIN-13 | |||
|PIN-15 | |||
|PIN-17 | |||
|PIN-19 | |||
|PIN-21 | |||
|PIN-23 | |||
|PIN-25 | |||
|- | |||
! AD1-0 | |||
!AD1-1 | |||
!AD1-2 | |||
!AD1-3 | |||
!AD1-4 | |||
!AD1-5 | |||
!AD1-6 | |||
!AD1-7 | |||
!GND | |||
!DAC-A | |||
!DAC-B | |||
!DAC-C | |||
!DAC-D | |||
|} | |||
Pin 1 on both tables can be identified by a small white dot silkscreened on the PCB. |
Revision as of 13:24, 12 September 2012
Product Page | |
Documentation | |
---|---|
Schematic | |
Mechanical Drawing | |
FTP Path | |
ADC Datasheet | |
DAC Datasheet |
OVERVIEW
The TS-ADC16 is a 8-bit (16-bit in ARM mode) PC/104 peripheral board (standard format) that provides 16 channels of 16-bit analog to digital conversion (ADC or A/D converter) with internal 512x16bit RAM-FIFO. In addition, it provides 4 channels of 12-bit digital to analog conversion (DAC), 4 16-bit counters, 4 digital inputs and 1 digital output. It is a strong solution for data acquisition, measurement, control and analog interface applications. Features include:
Features |
---|
Two LTC1859 ADC chips |
16 channels 16-bit ADC |
ADC Sampling rate up to 2x100ksps |
Takes 2 ADC samples simultaneously |
4 different ADC ranges |
512x16bit RAM-FIFO for ADC data |
4 digital inputs - 0 to 5V |
1 digital output - 0 to 3.3V/50mA |
4 12-bit DAC channels |
4 16-bit counters |
Jumper selectable I/O an IRQ |
PC/104 Dimensions 3.6 x 3.8 inches |
Headers and Pins
The TS-ADC16 has one jumper block (JP), two AD headers (AD1, AD2), and two banks of screw terminals. The tables below describe each of these features.
gnd | gnd | gnd | gnd | gnd | gnd | gnd | gnd | gnd | gnd | gnd | gnd | gnd |
---|---|---|---|---|---|---|---|---|---|---|---|---|
PIN-02 | PIN-04 | PIN-06 | PIN-08 | PIN-10 | PIN-12 | PIN-14 | PIN-16 | PIN-18 | PIN-20 | PIN-22 | PIN-24 | PIN-26 |
*PIN-01 | PIN-03 | PIN-05 | PIN-07 | PIN-09 | PIN-11 | PIN-13 | PIN-15 | PIN-17 | PIN-19 | PIN-21 | PIN-23 | PIN-25 |
AD1-0 | AD1-1 | AD1-2 | AD1-3 | AD1-4 | AD1-5 | AD1-6 | AD1-7 | D-OUT | D-IN0 | D-IN1 | D-IN2 | D-IN3 |
gnd | gnd | gnd | gnd | gnd | gnd | gnd | gnd | gnd | gnd | gnd | gnd | gnd |
---|---|---|---|---|---|---|---|---|---|---|---|---|
PIN-02 | PIN-04 | PIN-06 | PIN-08 | PIN-10 | PIN-12 | PIN-14 | PIN-16 | PIN-18 | PIN-20 | PIN-22 | PIN-24 | PIN-26 |
*PIN-01 | PIN-03 | PIN-05 | PIN-07 | PIN-09 | PIN-11 | PIN-13 | PIN-15 | PIN-17 | PIN-19 | PIN-21 | PIN-23 | PIN-25 |
AD1-0 | AD1-1 | AD1-2 | AD1-3 | AD1-4 | AD1-5 | AD1-6 | AD1-7 | GND | DAC-A | DAC-B | DAC-C | DAC-D |
Pin 1 on both tables can be identified by a small white dot silkscreened on the PCB.