Search results

From embeddedTS Manuals

Page title matches

  • TS-RF2-ZIGBEE
    |title = TS-RF2-ZIGBEE |image = [[File:TS-RF2-ZIGBEE.jpg|300px]]
    3 KB (395 words) - 12:50, 22 June 2023
  • TS-7250-V3
    ...incomplete at this time and is subject to change without warning while the TS-7250-V3 is in Engineering Sampling phase.}} |title = TS-7250-V3
    68 KB (10,299 words) - 12:38, 22 April 2024
  • TS-7250-V3 Magnetometer
    1 KB (198 words) - 13:08, 18 July 2023
  • TS-7250-V3 RTC
    ...handled by the kernel and is presented as a standard RTC device in Linux. TS-7250-V3 board provides battery backed power to the RTC via a replaceable CR1632 coi
    304 bytes (57 words) - 17:46, 2 January 2020
  • TS-7250-V3 getting started
    28 bytes (3 words) - 15:11, 19 March 2020
  • TS-7250-V3 ADC
    3 KB (518 words) - 10:53, 9 April 2024
  • TS-7250-V3 USB Ports
    The TS-7250-V3 has 2 USB type A host ports. The bottom USB host port can optionally be ro
    480 bytes (79 words) - 10:51, 9 April 2024
  • TS-7250-V3 boot from USB
    wget http://files.embeddedTS.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-bullseye-latest.tar.xz Model: Technologic Systems i.MX6UL TS-7250-V3
    3 KB (410 words) - 14:27, 18 January 2022
  • TS-7250-V3 Bookworm Getting Started
    | [https://files.embeddedts.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul_debian_12_headless-latest.tar.xz tsimx6
    2 KB (316 words) - 17:50, 9 August 2023
  • TS-7250-V3 DIO Header
    [[File:TS-7250-V3-DIO Header.svg|302px]]
    3 KB (421 words) - 10:54, 9 April 2024
  • TS-7250-V3 Supervisory RTC
    5 KB (853 words) - 10:00, 2 March 2023
  • TS-7250-V3 PC104 bus
    The TS-7250-V3 includes an ISA bus for compatibility with PC104 peripherals. Arm itself h
    6 KB (957 words) - 17:17, 13 December 2023
  • TS-7250-V3 Buster Getting started
    ...6ul-debian-buster-latest.tar.xz] ([https://files.embeddedTS.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-buster-latest.tar.xz.md5 md5])
    1 KB (208 words) - 17:06, 17 January 2022
  • TS-7250-V3 PC104 MMAP
    913 bytes (148 words) - 15:13, 26 March 2020
  • TS-7250-V3 Bullseye Getting started
    ...l-debian-bullseye-latest.tar.xz] ([https://files.embeddedTS.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-bullseye-latest.tar.xz.md5 md5])
    1 KB (208 words) - 17:05, 17 January 2022
  • TS-7250-V3 FPGA ADC
    The TS-7250-V3 includes a simple low speed ADC to support the analog input on mikrobus mod
    3 KB (474 words) - 09:58, 16 December 2022
  • TS-7250-V3 Buster Network
    636 bytes (92 words) - 11:39, 15 October 2021
  • TS-7250-V3 Ethernet Connectors
    The TS-7250-V3 supports two independent 10/100 Ethernet ports. See the [[#Debian_10_-_Con [[File:TS-7250-V3 Eth.svg|300px]]
    228 bytes (32 words) - 12:25, 26 February 2020
  • TS-7250-V3 Supervisory Temperature
    521 bytes (75 words) - 11:47, 31 March 2023
  • TS-7250-V3 LCD Header
    ...t up to 3.3V, and the remaining control IO and PWM are 3.3V tolerant. The TS-7250-V3 Debian images include a command [https://github.com/embeddedTS/ts7100-utils [[File:TS-7250-V3-LCD Header.svg|302px]]
    3 KB (384 words) - 10:10, 9 April 2024
  • TS-7250-V3 COM3 Header
    [[File:TS-7250-V3-COM3.svg|302px]]
    467 bytes (67 words) - 13:12, 24 February 2020
  • TS-7250-V3 MikroBus Header
    [[File:TS-7250-V3-Mikrobus Header.svg|302px]]
    2 KB (346 words) - 10:16, 9 April 2024
  • TS-7250-V3 ADC Header
    | 2198000.adc/voltage9 [[#TS-7250-V3 Supervisory Low Power Mode|WAKE_UP#]] [[File:TS-7250-V3-ADC.svg|300px]]
    798 bytes (112 words) - 15:09, 6 April 2023
  • TS-7250-V3 MicroSD Connector
    [[File:TS-7250-V3 MicroSD Card.jpeg|400px]]
    188 bytes (32 words) - 10:42, 12 July 2021
  • TS-7250-V3 PC104 Peripherals
    The TS-7250-V3 is compatible with most of our PC104 devices. We do not test third party P | [[#TS-RF2-ZIGBEE|TS-RF2-ZIGBEE]]
    2 KB (242 words) - 10:48, 21 March 2022
  • TS-7250-V3 FPGA PWM
    The TS-7250-V3 includes a PWM core that supports 10-bit duty/period, a 79.2mhz input clock
    4 KB (592 words) - 16:06, 9 April 2024
  • TS-7250-V3 MicroUSB Connector
    The TS-7250-V3 features an onboard supervisory microcontroller that converts the onboard 3 [[File:TS-7250-V3 USB Console.jpg|300px]]
    196 bytes (30 words) - 17:27, 27 February 2020
  • TS-7250-V3 Power Consumption
    The TS-7250-V3's i.MX6UL CPU is very flexible with power. It can change the running freque |+ TS-7250-V3
    1 KB (217 words) - 15:07, 22 September 2023
  • TS-7250-V3 FPGA I2C
    The TS-7250-V3 supports the opencore I2C controller which is used for Mikrobus I2C.
    441 bytes (78 words) - 17:06, 17 January 2022
  • TS-7250-V3 PC104 Header
    [[File:TS-7250-V3 PC104 pinout.svg|200px]]
    7 KB (995 words) - 10:57, 9 April 2024
  • TS-7250-V3 USB production
    The TS-7250-V3 supports using a USB thumbdrive to rewrite the onboard media. If the USB m wget http://ftp.embeddedTS.com/ftp/ts-arm-sbc/ts-7250-v3-linux/usb-blaster/ts7250v3-usb-production-rootfs-latest.tar.bz2
    3 KB (479 words) - 14:27, 18 January 2022
  • TS-7250-V3 IO Ranges
    643 bytes (105 words) - 17:58, 22 September 2023
  • TS-7250-V3 16550 Notes
    700 bytes (115 words) - 10:25, 29 September 2023
  • TS-7250-V3 COM2 Header
    [[File:TS-7250-V3-COM2.svg|302px]]
    509 bytes (70 words) - 13:08, 24 February 2020
  • TS-7250-V3 ST ISM330
    4 KB (602 words) - 13:13, 14 October 2021
  • TS-7250-V3 Power Connectors
    The TS-7250-V3 provides two power inputs on 2 pin removable terminal blocks. One terminal [[File:TS-7250-V3 removable power connector.jpg|500px]]
    703 bytes (112 words) - 13:46, 9 June 2023
  • TS-7250-V3 buildroot general
    456 bytes (75 words) - 11:48, 17 April 2020
  • TS-7250-V3 DB9 Connector
    488 bytes (67 words) - 13:25, 24 February 2020
  • TS-7250-V3 U-Boot
    448 bytes (72 words) - 15:21, 18 July 2022
  • TS-7250-V3 Supervisory ADC
    1 KB (173 words) - 09:47, 23 February 2023
  • TS-7250-V3 XBEE Header
    [[File:TS-7250-V3-XBEE Header.svg|302px]]
    3 KB (503 words) - 10:59, 9 April 2024
  • TS-7250-V3 Battery Connector
    [[File:TS-7250-V3-Battery.jpeg|300px]]
    93 bytes (13 words) - 16:09, 24 February 2020
  • TS-7250-V3 u-boot environment
    549 bytes (87 words) - 15:36, 19 March 2020
  • TS-7250-V3 U-boot development
    ...incomplete at this time and is subject to change without warning while the TS-7250-V3 is in Engineering Sampling phase.}}
    2 KB (246 words) - 16:02, 19 July 2022
  • TS-7250-V3 MicroSD Backup/restore
    wget https://files.embeddedTS.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-bullseye-latest.tar.xz
    2 KB (253 words) - 16:25, 5 February 2024
  • TS-7250-V3 PC104 Bus Timing
    The TS-7250-V3 PC104 cycles are approximately 1us per access in total, on either 8 or 16-b | [[File:TS-7250-V3 PC104 Write Strobe.svg|800px]]
    1 KB (184 words) - 11:46, 9 July 2021
  • TS-7250-V3 Power Supply Specifications
    The TS-7250-V3 supports 2 input ranges. The +5V input on CN2, and the 8-28V input on CN12. ...controller will trigger a brownout reset if this dips below 4V. While the TS-7250-V3 will continue to operate at this low of a voltage, any connected devices us
    627 bytes (107 words) - 13:38, 22 September 2023
  • TS-7250-V3 eMMC Backup/restore
    These instructions assume the TS-7250-V3 is booted from SD card all the way to Linux. They also assume that the eMMC wget https://files.embeddedTS.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-bullseye-latest.tar.xz
    1 KB (217 words) - 16:48, 23 May 2022
  • TS-7250-V3 U-Boot shell
    1 KB (183 words) - 12:12, 19 July 2022
  • TS-7250-V3 Ubuntu lunar getting started
    | [https://files.embeddedts.com/ts-arm-sbc/ts-7250-v3-linux/distributions/ubuntu/tsimx6ul_ubuntu_23_04_headless-latest.tar.xz tsi | [https://files.embeddedts.com/ts-arm-sbc/ts-7250-v3-linux/distributions/ubuntu/tsimx6ul_ubuntu_23_04_minimal-latest.tar.xz tsim
    2 KB (334 words) - 13:09, 22 September 2023

Page text matches

  • TS-7250-V3 PC104 Peripherals
    The TS-7250-V3 is compatible with most of our PC104 devices. We do not test third party P | [[#TS-RF2-ZIGBEE|TS-RF2-ZIGBEE]]
    2 KB (242 words) - 10:48, 21 March 2022
  • TS-7250-V3 Ethernet Connectors
    The TS-7250-V3 supports two independent 10/100 Ethernet ports. See the [[#Debian_10_-_Con [[File:TS-7250-V3 Eth.svg|300px]]
    228 bytes (32 words) - 12:25, 26 February 2020
  • PC104 compatibility matrix
    | TS-RF2-ZIGBEE
    9 KB (1,082 words) - 16:52, 26 August 2016
  • TS-7250-V3 MicroUSB Connector
    The TS-7250-V3 features an onboard supervisory microcontroller that converts the onboard 3 [[File:TS-7250-V3 USB Console.jpg|300px]]
    196 bytes (30 words) - 17:27, 27 February 2020
  • TS-4900 Bullseye Network
    {{:TS-7250-V3 Buster Network}}
    30 bytes (4 words) - 12:23, 3 February 2022
  • TS-7990 STM ISM330 Gyroscope
    {{:TS-7250-V3 ST ISM330 Gyroscope}}
    35 bytes (5 words) - 11:16, 27 March 2024
  • TS-7250-V3 Battery Connector
    [[File:TS-7250-V3-Battery.jpeg|300px]]
    93 bytes (13 words) - 16:09, 24 February 2020
  • TS-7250-V3 Power Supply Specifications
    The TS-7250-V3 supports 2 input ranges. The +5V input on CN2, and the 8-28V input on CN12. ...controller will trigger a brownout reset if this dips below 4V. While the TS-7250-V3 will continue to operate at this low of a voltage, any connected devices us
    627 bytes (107 words) - 13:38, 22 September 2023
  • TS-7250-V3 ADC Header
    | 2198000.adc/voltage9 [[#TS-7250-V3 Supervisory Low Power Mode|WAKE_UP#]] [[File:TS-7250-V3-ADC.svg|300px]]
    798 bytes (112 words) - 15:09, 6 April 2023
  • TS-7250-V3 Power Connectors
    The TS-7250-V3 provides two power inputs on 2 pin removable terminal blocks. One terminal [[File:TS-7250-V3 removable power connector.jpg|500px]]
    703 bytes (112 words) - 13:46, 9 June 2023
  • TS-7250-V3 Power Consumption
    The TS-7250-V3's i.MX6UL CPU is very flexible with power. It can change the running freque |+ TS-7250-V3
    1 KB (217 words) - 15:07, 22 September 2023
  • Documentation Home
    | {{ProductPreview|File:TS-7250-V3.jpg|TS-7250-V3|TS-7250-V3|NXP i.MX6UL<br>696MHz Cortex-A7}} | {{ProductPreview|File:TS-RF2-ZIGBEE.jpg|TS-RF2-ZIGBEE|TS-RF2-ZIGBEE|XBee Module}}
    9 KB (1,183 words) - 15:44, 7 March 2022
  • TS-7250-V3 PC104 Bus Timing
    The TS-7250-V3 PC104 cycles are approximately 1us per access in total, on either 8 or 16-b | [[File:TS-7250-V3 PC104 Write Strobe.svg|800px]]
    1 KB (184 words) - 11:46, 9 July 2021
  • TS-7250-V3 MicroSD Connector
    [[File:TS-7250-V3 MicroSD Card.jpeg|400px]]
    188 bytes (32 words) - 10:42, 12 July 2021
  • TS-7250-V3 TS-12W
    ...-12W provides 2.4 A on PC/104 5V pin and supports a VIN of 10-30 VDC. The TS-7250-V3 has a built in regulator supporting 8-48 VDC which is recommended instead,
    739 bytes (106 words) - 13:43, 9 June 2023
  • TS-7250-V3 TS-13W
    ...TS-13W provides 2.6 A on PC/104 5V pin and supports a VIN of 8-30 VDC. The TS-7250-V3 has a built in regulator supporting 8-48 VDC which is recommended instead,
    737 bytes (106 words) - 13:44, 9 June 2023
  • TS-7250-V3 FPGA I2C
    The TS-7250-V3 supports the opencore I2C controller which is used for Mikrobus I2C.
    441 bytes (78 words) - 17:06, 17 January 2022
  • TS-7250-V3 RTC
    ...handled by the kernel and is presented as a standard RTC device in Linux. TS-7250-V3 board provides battery backed power to the RTC via a replaceable CR1632 coi
    304 bytes (57 words) - 17:46, 2 January 2020
  • TS-7250-V3 COM3 Header
    [[File:TS-7250-V3-COM3.svg|302px]]
    467 bytes (67 words) - 13:12, 24 February 2020
  • TS-RF2-ZIGBEE
    |title = TS-RF2-ZIGBEE |image = [[File:TS-RF2-ZIGBEE.jpg|300px]]
    3 KB (395 words) - 12:50, 22 June 2023
  • TS-7250-V3 COM2 Header
    [[File:TS-7250-V3-COM2.svg|302px]]
    509 bytes (70 words) - 13:08, 24 February 2020
  • TS-7250-V2 Power Consumption
    974 bytes (149 words) - 17:08, 23 March 2018
  • TS-7250-V3 TS-SER1
    {{:TS-7250-V3 16550 Notes}}
    1 KB (151 words) - 10:32, 29 September 2023
  • TS-7250-V3 eMMC Backup/restore ums
    ...r than direct access from Linux when [[#Booted_from_SD|booted from SD]] on TS-7250-V3 itself, but it allows for direct updating of the flash media from a host de ..., enter the [[#Entering_U-Boot_Shell|U-Boot shell]] while connected to the TS-7250-V3 via the [[#Get_a_Console|USB serial interface]]. Insert the proper USB cabl
    3 KB (562 words) - 16:48, 23 May 2022
  • TS-7250-V3 USB Ports
    The TS-7250-V3 has 2 USB type A host ports. The bottom USB host port can optionally be ro
    480 bytes (79 words) - 10:51, 9 April 2024
  • TS-7250-V3 LCD Header
    ...t up to 3.3V, and the remaining control IO and PWM are 3.3V tolerant. The TS-7250-V3 Debian images include a command [https://github.com/embeddedTS/ts7100-utils [[File:TS-7250-V3-LCD Header.svg|302px]]
    3 KB (384 words) - 10:10, 9 April 2024
  • TS-7250-V3 XBEE Header
    [[File:TS-7250-V3-XBEE Header.svg|302px]]
    3 KB (503 words) - 10:59, 9 April 2024
  • TS-7100 buildroot
    {{Note|Support for the TS-7100 and TS-7250-V3 in Buildroot are provided by the same configuration files.}}
    2 KB (222 words) - 16:12, 4 December 2023
  • TS-RF2-AERO
    3 KB (465 words) - 12:50, 22 June 2023
  • TS-7250-V3 TS-ADC16
    ...n, 4 digital inputs, 4 16-bit edge counters, and 1 digital output. On the TS-7250-V3 this will support a max sample rate of 16khz with 2 channels enabled. * The TS-7250-V3
    3 KB (506 words) - 14:26, 18 January 2022
  • TS-7250-V3 Supervisory Low Power Mode
    * [[#TS-7250-V3 ADC Header|CN8 ADC Header pin 9 has 3-30V applied.]]
    845 bytes (142 words) - 12:00, 22 February 2023
  • TS-7250-V3 TS-ISO485
    {{:TS-7250-V3 16550 Notes}}
    2 KB (233 words) - 10:26, 29 September 2023
  • TS-7250-V3 U-boot development
    ...incomplete at this time and is subject to change without warning while the TS-7250-V3 is in Engineering Sampling phase.}}
    2 KB (246 words) - 16:02, 19 July 2022
  • TS-7250-V3 TS-SER4
    {{:TS-7250-V3 16550 Notes}}
    2 KB (251 words) - 10:37, 29 September 2023
  • TS-7250-V3 TS-SER2
    {{:TS-7250-V3 16550 Notes}}
    2 KB (242 words) - 10:32, 29 September 2023
  • TS-7250-V2 CAN
    2 KB (298 words) - 12:48, 9 March 2018
  • TS-7250-V3 boot from USB
    wget http://files.embeddedTS.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-bullseye-latest.tar.xz Model: Technologic Systems i.MX6UL TS-7250-V3
    3 KB (410 words) - 14:27, 18 January 2022
  • TS-7250-V3 eMMC Backup/restore
    These instructions assume the TS-7250-V3 is booted from SD card all the way to Linux. They also assume that the eMMC wget https://files.embeddedTS.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-bullseye-latest.tar.xz
    1 KB (217 words) - 16:48, 23 May 2022
  • TS-7250-V3 TS-MULTI-104
    {{:TS-7250-V3 16550 Notes}}
    2 KB (298 words) - 10:32, 29 September 2023
  • TS-RF2-CF
    5 KB (878 words) - 12:48, 22 June 2023
  • TS-7180 Daughter Card Interface
    778 bytes (126 words) - 11:32, 11 May 2023
  • TS-4900 Debian Sections
    {{:TS-7250-V3 Buster Network}}
    3 KB (368 words) - 18:09, 6 July 2023
  • Baseboard ID table
    540 bytes (59 words) - 13:35, 29 January 2024
  • TS-7180 HD12
    734 bytes (112 words) - 17:57, 15 June 2021
  • TS-7250-V3 TS-ADC24
    ...l conversion at 4 channels of 12-bit digital to analog conversion. On the TS-7250-V3 this will support a max sample rate of 8khz with the minimum 4 channels ena
    4 KB (531 words) - 14:26, 18 January 2022
  • TS-7250-V2 ADC
    2 KB (273 words) - 17:05, 17 January 2022
  • TS-7250-V3 MikroBus Header
    [[File:TS-7250-V3-Mikrobus Header.svg|302px]]
    2 KB (346 words) - 10:16, 9 April 2024
  • TS-7250-V3 DIO Header
    [[File:TS-7250-V3-DIO Header.svg|302px]]
    3 KB (421 words) - 10:54, 9 April 2024
  • TS-7120
    {{:TS-7250-V3 ST_ISM330 Accelerometer}} {{:TS-7250-V3 ST_ISM330 Gyroscope}}
    10 KB (1,340 words) - 13:13, 18 July 2023
  • TS-47XX 3.14 Debian Changelog
    3 KB (484 words) - 16:51, 17 January 2022
View (previous 50 | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "http://docs.embeddedTS.com/Special:Search"